Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Adding background images and contact pictures using FRITZ!Fon
The FRITZ!Box allows you to add your own images to telephone book entries that you use often. When those parties call, the corresponding pictures are then shown on the display of your FRITZ!Fon. You can also configure your own background image for each telephone that is then displayed in standby mode. You simply use the FRITZ!Box user interface to upload the images and transmit them to your telephones.
Requirements / Restrictions
- Only FRITZ!Fons with color displays support the use of background images and contact pictures.
- No DECT repeaters from other manufacturers are registered with the FRITZ!Box.
- You can add up to 256 contact pictures.
- Contact pictures can only be added to telephone books that are directly saved in the FRITZ!Box. With online telephone books, the pictures assigned to contacts in the online telephone books are displayed.
- The pictures must be in JPEG file format.
Note:We recommend a resolution of at least 240x320 pixels for the images, with an ideal aspect ratio of 1:1. When you save an image as JPEG in image editing software, we recommend using "baseline" encoding (usually the default).
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Enabling encryption
DECT encryption must be enabled to use convenience functions with your FRITZ!Fon:
- Click "Telephony" in the FRITZ!Box user interface.
- Click "DECT" in the "Telephony" menu.
- Enable the option "Permit only secure DECT connections (recommended)" in the section "Security".
- Click "Apply" to save the settings.
- If the option was disabled, you must then restart the FRITZ!Box once using the user interface ("System > Backup > Restart").
2 Adding contact pictures
- Click "Telephony" in the FRITZ!Box user interface.
- Click "Telephone Book" in the "Telephony" menu.
- If you saved more than one telephone book in the FRITZ!Box, switch to the telephone book you use with the telephone.
- Click the (Edit) button for the respective telephone book entry.
- Click on the "Add Photo" tab and then click the "Add Photo" button. If the tab is not displayed, the FRITZ!Box is configured as a Mesh Repeater. Contact pictures can only be configured in the Mesh Master and are not displayed in the telephone book of the Mesh Repeater.
- Click the "Browse..." or "Choose File" button and select the desired image.
- Click "Apply" and "OK" to save the settings.
3 Adding a background image
- Click "Telephony" in the FRITZ!Box user interface.
- Click "Telephony Devices" in the "Telephony" menu.
- Click the (Edit) button for the respective telephone.
- Click on the "Telephony Device Features" tab.
- Click the "Assign background image" button.
- Click the "Browse..." or "Choose File" button and select the desired image.
- Click "OK" to save the settings.
- Press the "Menu" button on the telephone.
- Scroll to "Settings" and press "OK".
- "Menu" > "Start Screens" > "Classical"
- Enable the option "Background image" and press "OK".
The images are now shown on the display of your telephone. The bottom part of the images is displayed lighter than the upper part. This way you can always read the text displayed there, regardless of the image being displayed.