Recommend:
To the knowledge base

Configuring the integrated fax function in the FRITZ!Box

You want to use the FRITZ!Box to send and receive faxes? ✔ Simply set up the integrated fax function, you don't need a fax machine.

With the FRITZ!Box you can also send and receive faxes without an external fax machine. The FRITZ!Box receives the faxes and forwards them as PDF files named after the reception date and time via email and/or saves them on a USB storage device in the folder "FRITZ\faxbox". When sending faxes, you enter the text of the fax in the FRITZ!Box user interface.

Requirements / Restrictions

  • To send faxes, you must select a telephone number that is also automatically used for receiving faxes. You will no longer be able to receive calls to this telephone number since the fax will then answer all calls to this number - even telephone calls.
  • A maximum of two A4 pages can be transmitted per fax. If your fax document is longer, it will be shortened to two A4 pages.
  • Graphics can only be attached to the fax document if you are using Google Chrome or Mozilla Firefox. For technical reasons, you cannot attach image files with the Internet Explorer and Safari.
  • You can attach one image file saved in JPG or PNG format. Other file formats (such as PDF or DOC) are ignored when sending faxes.
  • Images larger than A4 are reduced in size when the fax is sent. Smaller images are centered.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Preparations

Enabling the fax switch (passive)

If you want to use your analog landline number to receive telephone calls and also faxes, enable the FRITZ!Box's fax switch. The fax switch automatically forwards faxes to a fax machine configured in the FRITZ!Box:

Important:For faxes to be recognized and forwarded, a different device, for example a telephone or answering machine, must accept the call. The fax switch does not recognize calls that are not accepted.

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Enable the passive fax switch. If the setting is not displayed, enable the Advanced View and configure your analog landline number in the FRITZ!Box. You can then enable the passive fax switch.
  5. Click "Apply" to save the settings.

Enabling fax transmission with T.38

If you use an internet telephone number for faxing, you must enable T.38 (fax over IP) in the FRITZ!Box for fax transmission. With T.38, a special network protocol is used for fax transmission instead of signal tones. This makes transmission significantly less susceptible to interference:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Enable the option "Fax transmission using T.38" in the "Voice Packets" section. If the section is not displayed, enable the Advanced View first.
  5. Click "Apply" to save the settings.

2 Configuring the fax function

Enabling the fax function and entering fax ID

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the "Configure New Device" button.
  4. Select the option "Fax function" in the section "Integrated in the FRITZ!Box" and click "Next".
  5. In the "Fax ID" field, enter the ID that should be transmitted to anyone who sends a fax to the FRITZ!Box, and that should be transmitted to recipients when sending faxes. You can enter your number or your name, for example.

    Important:Many recipients block faxes from numbers without caller ID to protect themselves from unwanted advertisements.

Selecting email forwarding and location for saving

  1. Select email forwarding and specify where faxes should be saved:
    • "Forward by email"
      • Faxes that are successfully sent and received are automatically forwarded to one or more email addresses. If you want to enter several email addresses, separate them by commas and do not add spaces between them.

        Example:
        john@smith.com,jane@smith.com

    • "Do not save"
      • Faxes are not saved on an external USB storage device. You can only select this option if email forwarding is enabled.
      • If the fax is not successfully forwarded as an email to the email server and the fax is not saved on a storage device, the fax is lost and the fax function is disabled. This way, senders do not receive positive transmission reports for faxes that are lost. The fax function is not re-enabled until emails can be sent again or the FRITZ!Box is restarted.
    • "Save on the USB storage medium"
      • Received faxes are saved on a USB storage device connected to the USB port on the FRITZ!Box. Faxes you send are not saved.
      • If you remove the USB storage device later or enable the USB remote connection, you must disable this option again first. Otherwise, you will experience errors when receiving faxes because they can no longer be saved.
  2. Click "Next".

Entering email account information

In the next step, you may be asked to enter various email account information. This information is required if you want the FRITZ!Box to forward new faxes via email and the push service has not been configured yet. Enter the email account information as follows:

Note:The email account information can be edited any time under "System > Push-Service > Sender" in the FRITZ!Box user interface.

  1. "FRITZ!Box" is already entered as the name of sender. Enter a name of your choice or keep this name.
  2. In the "Email return address" field, enter the email address you want to use to send the emails.
  3. Enter the name of your email provider's SMTP server. If the SMTP server does not use the default port 25, you must also enter the port number.

    Example:
    The name of the SMTP server is smtp.de.post.net and the SMTP server uses port 599. In this case, enter the following: smtp.de.post.net:599

    Note:Outgoing emails are sent via the SMTP server (SMTP = Simple Mail Transport Protocol). Your email provider can give you the name and port number of the SMTP server.

  4. If the SMTP server requires the email username for authentication, enable the setting "email username" and enter the email username.
  5. If the SMTP server requires a password, enter the password and confirm it in the following field.
  6. Click "Next".

Assigning telephone numbers

  1. Define the telephone number for the fax function. When you select telephone numbers, the fax answers all calls to these numbers and you can no longer receive telephone calls to these numbers. Whether you must select numbers depends on whether you would like to receive and/or send faxes.
  2. If you want to send and receive faxes, enable at least one telephone number to send faxes with. The number or numbers are then also used to receive faxes.
    • If you only want to receive faxes, you have two options:
      1. Either: Select one or more telephone numbers. Then the fax will accept all calls to these numbers and faxes are received automatically.
        • Or: Do not select any numbers, and then automatic fax recognition is used for fax reception. For fax recognition to function, a FRITZ!Box answering machine must answer the call. Configure the answering machine so that it accepts the call after 10 to 25 seconds. The greeting delay may not be too long because incoming fax calls hang up then. Do not select the operating mode "Greeting only". With this operating mode, the time interval is too short fax recognition. The recording will be discarded after it recognizes a fax call.
    • It is not possible to configure the FRITZ!Box to only send faxes. To send faxes, you must select at least one telephone number that is then also used for receiving faxes.
  3. Click "Next" and then "Apply" to save the settings.

    Note:If you accept a fax call with a telephone connected to the FRITZ!Box, simply forward the call to a FRITZ!Box answering machine. The answering machine will automatically forward the call to the integrated fax machine after recognizing it as a fax call.

3 Using several email addresses for fax reception

If you selected several telephone numbers for receiving faxes, you can assign each of these telephone numbers a different email address to which faxes are then forwarded:

Note:Faxes that are forwarded from a telephone connected to the FRITZ!Box to an answering machine are forwarded to the email address(es) assigned to the first fax number.

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the fax function.
  4. Click on the "Properties" tab.
  5. Enter the email addresses for the various telephone numbers.
  6. Click "OK" to save the settings.