Recommend:
To the knowledge base
Knowledge document #3354

Adding an additional FRITZ!Box to the Mesh

You want to use a FRITZ!Box as a repeater via LAN or Wi-Fi? ✓ Here's how to set up your FRITZ!Box as a Mesh Repeater.

You can configure an additional FRITZ!Box for use as a Mesh Repeater and use Wi-Fi or a network cable to add it to the Mesh of your FRITZ!Box LTE (Mesh Master) to increase the range of your home network easily and efficiently.

As a Mesh Repeater, the additional FRITZ!Box automatically adopts all of the necessary settings from the Mesh Master (for example Wi-Fi access information, guest access, schedule) and creates an additional Wi-Fi network that enables your devices to connect to the home network.

As soon as the Mesh Repeater is integrated into the Mesh, it is marked with the Mesh symbol in the user interface of the Mesh Master:

Mesh Overview of the Mesh Master with an additional FRITZ!Box as a Mesh Repeater

Requirements / Restrictions

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Setting up the FRITZ!Box as a Mesh Repeater

Connecting the FRITZ!Box

  1. Use Wi-Fi or a network cable to connect a computer to the FRITZ!Box that you want to configure as the Mesh Repeater.
  2. If the computer is already connected to the Mesh Master, clear that connection.

Configuring the FRITZ!Box as a repeater

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Mesh" in the "Home Network" menu.
  3. Click on the "Mesh Settings" tab.
  4. Enable the option "FRITZ!Box as a Mesh Repeater".
  5. Enable the option "This FRITZ!Box is a network device (IP client) in the home network [...]".
  6. If you want to use a network cable to connect the FRITZ!Box to the Mesh Master:
    1. Enable the option "via LAN".
    2. Click "Apply" to save the settings.
    3. Use a network cable to connect a LAN port on the FRITZ!Box either directly to a LAN port on the Mesh Master, or via a hub or switch.
    • If you want to use Wi-Fi to connect the FRITZ!Box to the Mesh Master:
      1. Enable the option "via Wi-Fi".
      2. In the table, select the Wi-Fi network of the Mesh Master. If several entries are displayed for the Wi-Fi network, use the MAC address to select the appropriate entry.
      3. Enter the Mesh Master's Wi-Fi network key in the "Network key" field.
      4. Click "Apply" to save the settings.

2 Adding the Mesh Repeater to the Mesh by button

You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the Mesh Repeater first. We recommend the following order:

  1. Push and hold down the Connect button on the Mesh Repeater (see table) until the Connect LED flashes. Other LEDs may also flash.
  2. Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConnect LED
    FRITZ!Box 6690, 5690, 4060 Connect Connect
    FRITZ!Box 7690, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530, 4050 Connect / WPS Connect / WPS
    FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT
    FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  3. The process is complete as soon as the Mesh Master marks the Mesh Repeater with the Mesh symbol in the Mesh Overview.

3 Setting up telephony in the Mesh

You can always set up IP telephones as telephone devices in the Mesh Master, even if the telephones are connected to the Mesh Repeater. If you also use different telephones connected to the Mesh Repeater:

  1. Set up telephony in the Mesh.



Help topics:

Related topics:

Language selection