Recommend:
To the knowledge base
Knowledge document #19

Changing the FRITZ!Box's IP address

In the factory settings, the FRITZ!Box uses the IPv4 address 192.168.178.1 for the home network. You can change this IP address to

  • connect the FRITZ!Box with another FRITZ!Box network (LAN-LAN linkup) via VPN. The IP networks of both of the FRITZ!Boxes may not be identical.
  • integrate the FRITZ!Box as a cascaded router in an existing network (cascaded router mode). The IP network of the FRITZ!Box an the other router may not be identical.
  • integrate devices into your home network that have fixed IP addresses specified by the manufacturer that you cannot change.

Requirements / Restrictions

  • The guest network of the FRITZ!Box has its own IP address range that was assigned by the FRITZ!Box and cannot be changed.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

Changing the FRITZ!Box's IP address

Changing the FRITZ!Box's IP network
  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click on "Network" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. Click "Additional Settings" in the section "WAN setting" or "LAN Settings" to display all of the settings.
  5. Click the "IPv4 Settings" button.
  6. Enter the desired IP address and subnet mask.
  7. Click "Apply" to save the settings and on the FRITZ!Box, confirm that the procedure may be executed, if you are asked to do so.
Language selection