Knowledge Base
AVM Content
To the knowledge base
Knowledge document #19
FRITZ!Box 7430
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Changing the FRITZ!Box's IP address
In the factory settings, the FRITZ!Box has the IP address 192.168.178.1. You can change it in order to
- integrate the FRITZ!Box into an existing network that uses an IP network other than 192.168.178.0.
- have IP addresses from a specific IP network assigned to the computers, smartphones, and other devices in the home network via DHCP.
Requirements / Restrictions
- The settings in this guide are not available if the FRITZ!Box is used as a Mesh Repeater or in IP client mode. In this case, proceed as described in the guide Setting up the FRITZ!Box as an IP client.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
Changing the FRITZ!Box's IP address
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Network" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- Click "Additional Settings" in the section "Guest Access" to display all of the settings.
- Click the "IPv4 Settings" button.
- Enter the desired IP address and subnet mask.
- Click "OK" to save the settings and on the FRITZ!Box, confirm that the procedure may be executed, if you are asked to do so.