Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1
FRITZ!Powerline 1240E
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Opening the FRITZ!Box user interface
You want to access the FRITZ!Box but don't know how to open fritz.box to configure it? ✔ Find out how to log in here.
You can easily open the user interface on all computers, smartphones, or tablets connected to the FRITZ!Box by entering the address http://fritz.box in a web browser. Then you can configure all of the FRITZ!Box functions and view detailed information about the product, your access, and connections in the user interface.
You do not have to set up the FRITZ!Box to open the user interface. Internet access is also not required.
Please note:
- You can either enter http://fritz.box or the IP address of the FRITZ!Box (http://192.168.178.1 in the factory settings) to open the user interface. In addition, you can always use the emergency IP http://169.254.1.1 to access the FRITZ!Box.
- It is not possible to call up the user interface via the guest access.
- Always enter the complete address http://fritz.box. If you enter the address without the "http://", for example, the web browser may start a web search instead of opening the user interface.
- If you connected two FRITZ!Boxes with each other, you can use the Mesh Overview of the first FRITZ!Box (Mesh Master) to easily open the user interface of the second FRITZ!Box (Mesh Repeater). You can also use the Mesh Overview of the Mesh Master to open the user interfaces of all the Mesh Repeaters (FRITZ!Repeaters and FRITZ!Powerline devices) in the home network.