Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1
FRITZ!Box 5590 Fiber
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
Opening the FRITZ!Box user interface
You can use fritz.box or http://169.254.1.1 to easily access the FRITZ!Box user interface with a browser. ✔
You can open the user interface on all computers, smartphones, or tablets connected to the FRITZ! home network by entering the address fritz.box or http://169.254.1.1 in a web browser.
The user interface can always be reached, even without internet access. After you enter the FRITZ!Box password, you can configure all of the FRITZ!Box functions and view detailed information about the product, your access, and connections in the user interface.
Please note:
- You can either use fritz.box or the fallback IP address http://169.254.1.1 to open the user interface. In addition, you can use the FRITZ!Box's local IP address (http://192.168.178.1 in the factory settings) to access it.
- Devices using the guest access / hotspot are denied access to the user interface.
- If you connected two FRITZ!Boxes with each other, you can use the Mesh Overview of the first FRITZ!Box (Mesh Master) to easily open the user interface of the second FRITZ!Box (Mesh Repeater). You can also use the Mesh Overview of the Mesh Master to open the user interfaces of all the Mesh Repeaters (FRITZ!Repeaters and FRITZ!Powerline devices) in the home network.