Recommend:
To the knowledge base
Knowledge document #3313
FRITZ!Fon X6
This support document is available for the following products:

Adjusting night mode on the FRITZ!Fon

Analog clock "night"

As soon as the brightness in the room falls below a certain threshold, the FRITZ!Fon automatically switches to night mode and displays the time and date in dark orange on a black background. The analog clock and date display jump to different positions on the display at regular intervals.

The brightness threshold is preset an cannot be changed. If you pick up the telephone or the brightness threshold is exceeded again, the telephone switches back to the usual start screen.

Night mode cannot be disabled. However, you can turn of the display of the FRITZ!Fon by enabling energy-saving mode when it is in and/or outside the cradle.

Requirements / Restrictions

  • FRITZ!OS 6.80 or later is installed on the FRITZ!Box.

Customizing the "Power save" option for night mode

  1. Press the "Menu" key on the telephone.
  2. Scroll to "Settings" and press "OK".
  3. "Display" > "Power save"
  4. If the FRITZ!Fon should display the orange analog clock when it is in the cradle, disable the option "in cradle".
    • If the FRITZ!Fon should switch off the display when it is in the cradle, enable the option "in cradle".
  5. If the FRITZ!Fon should display the orange analog clock when it is not in the cradle, disable the option "for battery operation".
    • If the FRITZ!Fon should switch off the display when it is not in the cradle, enable the option "for battery operation".
Language selection