Recommend:
To the knowledge base

Certain settings are missing from the FRITZ!Box user interface

You want to use or set up a certain function in the FRITZ!Box user interface. However, the corresponding settings, for example menu items or buttons, are not displayed although these settings are available in the user interface of a different FRITZ!Box of the same type.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Installing the latest FRITZ!OS for the FRITZ!Box

  1. Install the latest FRITZ!OS on the FRITZ!Box.

2 FRITZ!OS is updated by the provider

If you received your FRITZ!Box from your internet service provider, the provider hides the "Update" menu because the provider automatically installs the new FRITZ!OS. It is therefore not possible to install an update using the FRITZ!Box user interface. Refer to your provider for information on the new FRITZ!OS version and possible dates.

3 Enabling the Wi-Fi network

Some Wi-Fi settings are only displayed if the Wi-Fi network is enabled:

  1. Click "Wi-Fi" ("Wireless") in the FRITZ!Box user interface.
  2. Click "Wi-Fi Channel" ("Radio Channel") in the "Wi-Fi" ("Wireless") menu.
  3. Enable the option "Adjust Wi-Fi channel settings".
  4. Enable the Wi-Fi network for the 2.4 and the 5 GHz frequency bands.
  5. Click "Apply" to save the settings.

4 FRITZ!Box is configured as a Mesh Repeater / IP client

If the FRITZ!Box is configured as a "Mesh Repeater / IP client" under "Internet > Account Information", all of the settings that cannot be used in this operating mode are hidden. This is the case with port sharing, dynamic DNS, IP settings, the online meter, and DSL information. If the upstream router makes these functions available, you can set them up there. These settings are only available in the FRITZ!Box if the FRITZ!Box establishes the internet connection, for example when it is used as a DSL router.