Recommend:
To the knowledge base
Knowledge document #1079

Changing FRITZ!Box's Wi-Fi security settings

You want to change the FRITZ!Box's Wi-Fi password? ✔ In the user interface, you can easily change all of the encryption settings.

You can easily change the FRITZ!Box's Wi-Fi security settings and configure a new Wi-Fi network key for your Wi-Fi, for example. The FRITZ!Box (Mesh Master) automatically transmits changed Wi-Fi security settings to all Mesh Repeaters (for example FRITZ!Repeater) so that wireless devices in the FRITZ! Mesh can always use the same Wi-Fi access information to log on.

When you change the security settings, note that you must then reconfigure the Wi-Fi connection on all of the wireless devices.

Note:All instructions on configuration and settings given in this guide refer to the FRITZ!Box 6820 LTE v2, v3, and v4 with the latest FRITZ!OS, the FRITZ!Box 6820 LTE v1 may vary.

1 Enabling the Wi-Fi network

  1. Click "Wi-Fi" ("Wireless") in the FRITZ!Box user interface.
  2. Click "Wi-Fi Channel" ("Radio Channel") in the "Wi-Fi" ("Wireless") menu.
  3. Enable the option "Adjust Wi-Fi channel settings".
  4. Enable the Wi-Fi network for the 2.4 GHz frequency band.
  5. Click "Apply" to save the settings.

2 Changing the Wi-Fi security settings

Adjusting the Wi-Fi encryption in the user interface
  1. Click "Wi-Fi" ("Wireless") in the FRITZ!Box user interface.
  2. Click "Security" in the "Wi-Fi" ("Wireless") menu.
  3. Click on the "Encryption" tab.
  4. If you want to use secure WPA encryption (recommended):
    1. Enable the option "WPA encryption".
    2. From the drop-down list "WPA mode", select the WPA3 transition mode "WPA2 + WPA3". If you are using older wireless devices that do not support the WPA3 transition mode, select "WPA2 (CCMP)".

      Note:WPA3 transition mode is not supported by Apple iOS devices with iOS earlier than 12.1.1 and older wireless printers, for example. Refer to the respective manufacturer for information on the range of functions of your wireless devices.

    3. Enter a password in the "Wi-Fi network key" field. Use numerals, letters, and other characters, and mix upper and lower case letters.
    • If you do not want to use encryption (not recommended), which would leave your Wi-Fi network unprotected, enable the option "non-encrypted".
  5. Click "Apply" to save the settings.

Now the popup window "Access to Wi-Fi" ("Wireless LAN Access") with the new Wi-Fi access information for the FRITZ!Box opens. Print out or make note of the new Wi-Fi access information and reconfigure the Wi-Fi connection to the FRITZ!Box.



Help topics:

Language selection