Recommend:
To the knowledge base
Knowledge document #3733
FRITZ!Box 6690 Cable
This support document is available for the following products:

Connecting the FRITZ!Smart Gateway with the FRITZ!Box via Wi-Fi

Connect your FRITZ!Smart Gateway to your FRITZ!Box via Wi-Fi to add an access point for Zigbee devices to your home network quickly and easily.

Connection scenario for wireless bridge mode

1 Configuring FRITZ!Smart Gateway as a wireless bridge

  1. For setup, position the FRITZ!Smart Gateway near the Mesh Master.
  2. Wait about 1 minute until the FRITZ!Smart Gateway has started and the Connect LED on the FRITZ!Smart Gateway flashes slower.
  3. Briefly push the Connect button on the FRITZ!Smart Gateway (for about 1 second) and release it again. When you release the button, the Connect LED starts to flash quickly.
  4. Within 2 minutes: Briefly push the Connect button on the Mesh Master for about 1 second. When you release the button, the WLAN LED starts to flash. Other LEDs may also flash.
  5. The process is complete as soon as the Mesh Master marks the FRITZ!Smart Gateway with the Mesh symbol in the Mesh Overview.

Help topics:

Language selection