Recommend us:
To the Knowledge Base

Connecting the FRITZ!Box with the Mesh Repeater (cascading)

You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the Wi-Fi range of a Mesh Repeater.

This means that not only can you connect your FRITZ!Box via network cable to the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the Mesh Repeater is another FRITZ!Box, a FRITZ!Repeater, or a FRITZ!Powerline adapter.

In this guide we show you how to connect your new FRITZ!Box with an already existing Mesh Repeater.

Fig.: Example of cascading with FRITZ!Repeater and FRITZ!Box

Requirements / Restrictions

  • The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.
  • The existing Mesh Repeater has a LAN port.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting the FRITZ!Box with the existing Mesh Repeater

Connecting the FRITZ!Box

  1. Use Wi-Fi or a network cable to connect a computer to the FRITZ!Box that you want to integrate into the Mesh for the first time.
  2. If the computer is already connected to another device in the home network, clear that connection.

Configuring the FRITZ!Box

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Mesh" in the "Home Network" menu.
  3. Click on the "Mesh Settings" tab.
  4. Enable the option "FRITZ!Box as a Mesh Repeater".
  5. Enable the option "This FRITZ!Box is a network device (IP client) in the home network [...]".
  6. Click "Apply" to save the settings.
  7. Use a network cable to connect the a port on the new FRITZ!Box either directly to a LAN port on the existing Mesh Repeater, or by means of a hub or switch.

2 Adding a FRITZ!Box to the Mesh

To add the new FRITZ!Box to the Mesh, you simply have to push a button on the new FRITZ!Box and the Mesh Master. Then the new FRITZ!Box is automatically integrated into the Mesh via the network connection to the Mesh Master:

  1. Push and hold down the Connect button of the new FRITZ!Box (see table) until its Connect LED flashes. Other LEDs may also flash.
  2. Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConnect LED
    FRITZ!Box 6690, 4060 Connect Connect
    FRITZ!Box 7590 (AX), 7530 (AX), 7520, 6890, 6850, 6660, 5530 Connect / WPS Connect / WPS
    FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT
    FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  3. The process is complete as soon as the Mesh Master marks the new FRITZ!Box with the Mesh symbol in the Mesh Overview.

3 Transmitting cable TV content (DVB-C) to the Mesh

If you want to transmit your cable provider's cable TV content to the home network as an IP stream, configure television reception in the FRITZ!Box:

  1. Configure the FRITZ!Box Cable for television reception via DVB-C.

4 Setting up telephony in the Mesh

You can always set up IP telephones as telephone devices in the Mesh Master, even if the telephones are connected to the Mesh Repeater. If you also use different telephones connected to the Mesh Repeater:

5 Finding the ideal location for the FRITZ!Box

If the new FRITZ!Box is connected to the existing Mesh Repeater via Wi-Fi:

  1. Select a location for the FRITZ!Box where the quality of the Mesh Repeater's Wi-Fi signal is good. You can find tips on positioning it in the guide Finding the ideal location for the Mesh Repeater.