Recommend us:
To the Knowledge Base

Connecting the FRITZ!Box with the Mesh Repeater (cascading)

You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the Wi-Fi range of a Mesh Repeater.

This means that not only can you connect your FRITZ!Box with the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the Mesh Repeater is another FRITZ!Box, a FRITZ!Repeater, or a FRITZ!Powerline adapter.

In this guide we show you how to connect your new FRITZ!Box with an already existing Mesh Repeater.

Fig.: Example of cascading with FRITZ!Repeater and FRITZ!Box

Requirements / Restrictions

  • The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.
  • The existing Mesh Repeater has a LAN port.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the Mesh Repeater's factory settings

In order to perform the following steps, the FRITZ!Box that you want to configure as the Mesh Repeater must be set to factory settings:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Factory Settings" tab.
  4. Click the "Load Factory Settings" button.

2 Connecting the Mesh Repeater to the Mesh Master via LAN

  1. Use a network cable to connect a LAN port the FRITZ!Box that you want to set up as a Mesh Repeater to a LAN port on the Mesh Master.

3 Adding the Mesh Repeater to the Mesh by button

  1. Push and hold down the connection button on the Mesh Repeater (see table) until its "WLAN" LED flashes. Other LEDs may also flash.
  2. Within 2 minutes: Push and hold down the connection button on the Mesh Master until its confirmation LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnection buttonConfirmation LED
    FRITZ!Box 7590 (AX), 7530 (AX), 7520, 6890, 6850, 6660, 5530Connect / WPSConnect / WPS
    FRITZ!Box 6591, 6590Connect / WPSWLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490WLAN WPSWLAN / Info
    FRITZ!Box 6490, 6430WLAN WPSWLAN / DECT
    FRITZ!Box 7560, 7362 SLWLANWLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580WPSWLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490WPSWLAN
  3. The process is complete as soon as the Mesh Master marks the Mesh Repeater with the Mesh symbol in the Mesh Overview.

Now the Mesh Repeater is configured as a LAN bridge. You can remove the network cable to the Mesh Master and use the network cable to connect the Mesh Repeater to the available Mesh Repeater.

4 Setting up telephony in the Mesh

If you also want to use the telephone numbers configured in the Mesh Master with telephones connected to the new FRITZ!Box: