Recommend:
To the knowledge base
Knowledge document #3369

FRITZ!Powerline is not marked with Mesh symbol

Although the FRITZ!Powerline device is connected to the FRITZ!Box and displayed in the Mesh Overview, the Mesh symbol is missing.

FRITZ!Powerline devices with Wi-Fi support are marked with the Mesh symbol in the Mesh Overview after they have been integrated into the Mesh. FRITZ!Powerline devices without Wi-Fi support (for example FRITZ!Powerline 1220E) are only marked with the Mesh symbol in the Mesh Overview if a FRITZ!Powerline device with Wi-Fi support that is integrated into the Mesh is connected to the FRITZ!Box as a powerline bridge over that FRITZ!Powerline device.

Mesh Master displays FRITZ!Powerline device without Mesh symbol

1 Installing the latest FRITZ!OS for the FRITZ!Powerline device

  1. Click "System" in the FRITZ!Powerline user interface.
  2. Click on "Update" in the "System" menu.
  3. Click on the "FRITZ!OS Version" tab.
  4. Click "Find New FRITZ!OS".
  5. Click the "Start Update" button.

2 Unlocking the buttons

You can only add devices to the Mesh by pushing a button. Therefore, unlock the buttons in the Mesh Master and the FRITZ!Powerline device:

Unlocking the Mesh Master's buttons

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the "Buttons locked" checkbox.
  5. Click "Apply" to save the settings.

Unlocking the FRITZ!Powerline device's buttons

  1. Click "System" in the FRITZ!Powerline user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the "Buttons locked" checkbox.
  5. Click "Apply" to save the settings.

3 Connecting the FRITZ!Powerline device directly with the Mesh Master

The following step is only necessary if the FRITZ!Powerline device is connected to the Mesh Master via a device from another manufacturer (for example a switch, powerline device):

  1. Connect the FRITZ!Powerline device directly to a LAN port on the Mesh Master. Do not use the WAN port. Not every FRITZ!Box model has a WAN port.

4 Adding the FRITZ!Powerline device to the Mesh by button

You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the Mesh Repeater first. We recommend the following order:

  1. Briefly push the Connect button (see table) on the FRITZ!Powerline device (for about 1 second) and release it again. When you release the button, depending on the FRITZ!Powerline model, several other LEDs flash at the same time.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260(E) / 1240 AX Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546E / 540E WLAN · WPS
  2. Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConnect LED
    FRITZ!Box 6690, 5690, 4060 Connect Connect
    FRITZ!Box 7690, 7682, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530, 4050 Connect / WPS Connect / WPS
    FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT
    FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  3. The process is complete as soon as the Mesh Master marks the FRITZ!Powerline device with the Mesh symbol in the Mesh Overview.
Language selection