To the knowledge base
Knowledge document #527
FRITZ!Box 6591 Cable
This support document is available for the following products:

Switching off the LEDs on the FRITZ!DECT smart plug

The LEDs always inform you about the current operating and connection status of the smart plug, for example FRITZ!DECT 200. If you do not need this information and the light bothers you, you can use the FRITZ!Box user interface to permanently switch off the LEDs.

Note:This guide is valid for FRITZ!OS 7.50 or later. If you are using an older FRITZ!OS version, the configuration may differ or functions may not be available. You can find the FRITZ!OS version on the "Overview" page of the FRITZ!Box user interface.

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Devices and Groups" in the "Smart Home" menu.
  3. Select all of the smart home devices from the drop-down list.
  4. Click the (Edit) button for the respective smart home device.
  5. Click "Additional Settings" to display all of the settings.
  6. Disable the option "LED display on".
  7. Click "Apply" to save the settings.

Now the LEDs are off. The LEDs briefly display the operating and connection status as soon as you push a button on the device and automatically go out again after 60 seconds.