Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6690 Cable
- FRITZ!Box 6670 Cable
Creating a routine for smart home devices
With routines you can control your smart home devices whose settings you saved in templates and scenes by using an if-this-then-that statement. Routines allow you to realize versatile and individual switching of your smart home devices.
In an if-this-then-that statement you define a specific action that is executed when a specific condition is met on a trigger. In this case a smart home device, for example a smart plug FRITZ!DECT or a smart switch FRITZ!DECT 440 serves as the trigger. The action is automatically executed, i.e. a template or a scenario is activated when a condition on the trigger, for example a switching state or measured temperature, is fulfilled.
The following is an example of a routine: If the humidity measured by the FRITZ!DECT 440 reaches a certain level, the previously configured scene "Humidity" with a FRITZ!DECT 200 smart plug with a connected humidifier is applied.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Creating templates and scenes for routines
First create the template or the scene with the desired settings for your smart home devices that you want to switch using the routine.
Creating a template
- Create the desired template for your smart home devices.
Creating a scene
- Create the desired scene for your smart home devices.
2 Creating a routine
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Automation" in the "Smart Home" menu.
- Click "Create Routine".
- Enter a name for the routine and click "Next".
- Select the device type and then the device to be checked as the trigger of the routine.
- Click "Next".
- Select the status change or event that is to be defined as the condition.
- Click "Next".
- Select the template or the scene as the action that is to be executed.
- Click "Next". A summary of the routine's settings is displayed.
- Check the settings and click "Finished" to save the settings. The route is created.
3 Applying the routine
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Operation" in the "Smart Home" menu.
- Enable the desired routine.
Note:You can also enable the routine with a FRITZ!Fon (menu "Home Network > Smart Home"), or use FRITZ!App Smart Home to enable it in the home network or over the internet.