Recommend:
To the knowledge base
Knowledge document #3554

Setting up FRITZ!Box for use with a Stipte line

The FRITZ!Box is optimally prepared for use with Stipte. Simply connect the FRITZ!Box to the fiber optic connection, select Stipte as the internet service provider in the FRITZ!Box, and set up telephony.

The complete FRITZ!Box range of functions for internet, telephony, and multimedia is then available to all of the devices in your home network without restriction.

Requirements / Restrictions

  • A FRITZ!Box Fiber with the SFP module "FRITZ!SFP AON" is required for active fiber optic connections (AON) from Stipte.
  • A FRITZ!Box Fiber with the SFP module "FRITZ!SFP GPON" is required for passive fiber optic connections (GPON) from Stipte.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Inserting the SFP module into the FRITZ!Box

The FRITZ!Box is available in several different product variants, each of which is delivered with different components. If there was no SFP module inserted in your FRITZ!Box, perform the following steps:

  1. Insert the SFP module that is suitable for your fiber optic connection into the fiber slot of the FRITZ!Box:
    1. If you have an active fiber optic connection (AON), insert the SFP module "FRITZ!SFP AON" into the fiber slot of the FRITZ!Box.
    2. If you have a passive fiber optic connection (GPON), insert the SFP module "FRITZ!SFP GPON" into the fiber slot of the FRITZ!Box.
      Inserting the SFP module into the FRITZ!Box

      Important:If you do not know what kind of fiber optic connection you have, test both of the SFP modules supplied with the FRITZ!Box. The Power/Fiber LED on the FRITZ!Box remains lit as soon as the FRITZ!Box is connected to the fiber optic connection using the correct SFP module.

2 Connecting the FRITZ!Box to your fiber optic connection

  1. Remove the dust protection caps from the fiber optic cable, the SFP module in the FRITZ!Box, and from the fiber optic socket (OTO).
  2. Connect the fiber optic cable to the SFP module in the FRITZ!Box and to the fiber optic socket. Do not bend the fiber optic cable and do not hold the ends of the cable in front of your eyes.

    Note:You can find information on selecting a suitable fiber optic cable in our guide Which fiber optic cable do I need?

    Connecting the FRITZ!Box to the fiber optic connection

3 Plugging the FRITZ!Box in

  1. Plug the power adapter into the FRITZ!Box's power socket and plug it into a power outlet.

4 Configuring the internet connection in the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password on the bottom of the device and click "Log In".
  3. If the menu "Account Information" is not displayed automatically, click "Account Information" in the "Internet" menu.
  4. Select "Stipte/GlobalXS" from the drop-down list "Internet service provider" and enable the correct connection type.
  5. Click "Apply" to save the settings.
  6. Now the FRITZ!Box checks whether the internet connection can be established. Configuration is completed as soon as the message "The internet connection check was successful" is displayed.

    Important:If the internet connection check fails, your internet access may not have been activated yet. In this case, contact Stipte.

5 Setting up telephony in the FRITZ!Box

Having your login information ready

  1. Have the login information for telephony that you received from Stipte ready.

    Note:Stipte sent you the login information via email after you concluded the contract with them. If you did not receive your login information, contact Stipte.

Configuring telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the "New Telephone Number" button.
  4. Select "Stipte / GlobalXS" from the drop-down list.
  5. Enter your telephone number including the area code by "Internet telephone number".
  6. For the "Password", enter the password you received from Stipte.
  7. Enter your area code by "Area code".
  8. Click "Next" and follow the wizard's instructions.

Assigning telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the respective telephony device.

    Important:If the telephony device was not configured yet, click the "Configure New Device" button and follow the wizard's instructions.

  4. From the drop-down list "Outgoing Calls", select the number to be used by the telephony device for making outgoing calls. If you do not select a telephone number, the number entered under "Telephony > Telephone Numbers > Line Settings" is used for making calls.
  5. Select the telephone numbers to which the telephony device should react when you receive calls. You can select up to ten numbers (including the number for outgoing calls).
  6. Click "Apply" to save the settings.