Recommend:

Connecting the FRITZ!Box to a VPN provider via WireGuard

With WireGuard, you can also use your FRITZ!Box to establish a VPN connection to an internet anonymization service (VPN provider). You can also specify whether all or only some of your devices in the home network can access the internet via the VPN provider.

You can find an overview of additional VPN connection options in our guide VPN with FRITZ!.

Requirements / Restrictions

  • The VPN provider must support WireGuard connections from a router.
  • Telephony via the VPN provider cannot be guaranteed. Depending on the telephony and VPN provider, telephony may not be possible or reliable.
  • No WireGuard connections may have been set up in the FRITZ!Box yet (for example for a smartphone). If WireGuard connections have already been set up in the FRITZ!Box, these must be deleted before setting up the connection to the VPN provider.
  • The FRITZ!Box 7490 and the FRITZ!Box 6820 LTE do not support connections to VPN providers.
  • FRITZ!Box 6590 Cable and FRITZ!Box 6490 Cable do not support WireGuard.

Note:This guide is valid for FRITZ!OS 7.50 or later. If you are using an older FRITZ!OS version, the configuration may differ or functions may not be available. You can find the FRITZ!OS version on the "Overview" page of the user interface.

1 Preparations

To set up WireGuard connections, the FRITZ!Box needs a MyFRITZ! address:

Setting up MyFRITZ!
  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click on "MyFRITZ! Account" in the "Internet" menu.
  3. Enter your email address in the "Your email address" field.
  4. Click on "Apply". Now MyFRITZ!Net sends you an email with the confirmation link to your FRITZ!Box.

    Important:If you do not receive an email, the email was classified as unsolicited advertising (spam). In this case, check the spam folder of your email inbox.

  5. Open the email you received from MyFRITZ!Net.
  6. Click the "Register Your FRITZ!Box" button in the email.

2 Setting up the VPN connection with the VPN provider

  1. Set up a WireGuard connection for a router with the VPN provider. Contact your VPN provider for information on how to set it up.
  2. Download the settings file for the WireGuard connection from the VPN provider to the computer.

3 Setting up a VPN connection in the FRITZ!Box

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click on "Permit Access" in the "Internet" menu.
  3. Click on the "VPN (WireGuard)" tab.
  4. Click the "Add Connection" button.
  5. Click "Connect networks or establish special connections" and then "Next".
  6. By "Has this WireGuard connection already been set up at the remote connection?", click "Yes".
  7. Click "Next".
  8. Enter a unique name for the connection in the "Name of the WireGuard connection" field (VPN provider).
    Setting up a WireGuard connection to a VPN provider in FRITZ!Box
  9. Click the "Choose File" or "Browse..." button.
  10. Select the settings file for the WireGuard connection that you downloaded from the VPN provider and click "Open".
  11. Enable the option "Send all IPv4 network traffic via the VPN connection".
  12. If only certain devices should be able to access the internet via the VPN provider, enable the option "Only certain devices in the home network are to be accessible over this WireGuard connection" and select the corresponding devices.
  13. Click the "Finish" button.
  14. If you are asked to do so, on the FRITZ!Box confirm that the procedure may be executed and click "OK" to complete the procedure.

Now the VPN connection is set up and the FRITZ!Box is permanently connected to the VPN provider.

Language selection