Recommend:
Knowledge document #3466
FRITZ!WLAN Repeater 310
This support document is available for the following products:

FRITZ!Repeater's WLAN LED flashes

The Power LED on the FRITZ!Repeater does not light up and the WLAN LED flashes continuously in the following sequence: blink two times, pause, blink two times. The problem may occur since updating FRITZ!OS.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Restarting the repeater

  1. Unplug the repeater.
  2. Plug the repeater back in after 5 minutes.

2 Loading the repeater's factory settings

  1. Push and hold down the WPS button for about 15 seconds.
  2. Now the factory settings are loaded and the FRITZ!Repeater restarts. This may take up to 2 minutes.
Language selection