Recommend:
To the knowledge base
Knowledge document #3773

Using roller shutter motors in the FRITZ!Box home network

In your FRITZ!Box home network you can register roller shutter motors from other manufacturers that use the DECT ULE/HAN FUN or Zigbee standard.

You can then easily operate your roller shutters using the smart home functions of the FRITZ!Box. For example you can configure automatic switching to automatically open the shutters in the morning and automatically close them in the hot midday sun. During vacation you can also use flexible controls in order to simulate being home by automatically opening and shutting the roller shutters, perhaps combined with smart lighting control.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Using roller shutter motors according to the DECT ULE/HAN FUN standard

You can register roller shutter motors that support the standard DECT ULE/HAN FUN directly with your FRITZ!Box.

  1. Click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
  2. Click "Devices and Groups" in the "Smart Home" menu.
  3. Click the "Register Device" button and follow the wizard's instructions.
  4. As soon as the roller shutter motor is successfully registered, it is displayed in the FRITZ!Box user interface under "Devices and Groups" and can be configured there.

2 Registering roller shutter motors according to the Zigbee standard

When using a roller shutter motor according to the Zigbee standard, for example from IKEA, it must be compatible with the FRITZ!Smart Gateway.

  1. Register the roller shutter motor according to the Zigbee standard with the FRITZ!Smart Gateway.

The roller shutter motor is now set up and you can switch and control it in the home network and from anywhere over the internet.



Related topics:

Language selection