Recommend:
Knowledge document #3466
FRITZ!Repeater 600
This support document is available for the following products:

FRITZ!Repeater's LED flashes

The FRITZ!Repeater's LED continuously flashes red or green, or alternates between green and orange. The repeater does not transmit any more data, and the repeater's user interface can no longer be opened.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Restarting the repeater

  1. Unplug the repeater.
  2. Plug the repeater back in after 5 minutes.

2 Loading the repeater's factory settings

  1. Push and hold down the Connect button for about 15 seconds.
  2. Now the factory settings are loaded and the FRITZ!Repeater restarts. This may take up to 2 minutes.

If the LED flashes quickly when the repeater restarts and then slowly flashes green after about a minute, you can reconfigure the FRITZ!Repeater in the FRITZ!Box home network or reconnect the FRITZ!Repeater with the router from another manufacturer.

Language selection