Knowledge Base
AVM Content
Connecting a FRITZ!Repeater with the Mesh Repeater via LAN (cascading)
You want to connect a FRITZ!Repeater to an existing FRITZ!Repeater via LAN? ✔ Find out how to cascade them here.
You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the Wi-Fi range of a Mesh Repeater.
This means that not only can you connect your FRITZ!Repeater with the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the existing Mesh Repeater is another FRITZ!Repeater, a FRITZ!Box, or a FRITZ!Powerline device, or whether the Mesh Repeater is connected via LAN or Wi-Fi.
In this guide we show you how to connect your new FRITZ!Repeater with an already existing Mesh Repeater using a network cable.
![](https://service.avm.de/support/media/en/467.png)
Requirements / Restrictions
- The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol
in the Mesh Overview.
- The existing Mesh Repeater has a LAN port.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.
1 Connecting the FRITZ!Repeater with a FRITZ!Box via LAN
The FRITZ!Repeater automatically configures itself as a LAN bridge if it is set to factory settings and it is connected to the FRITZ!Box via a network cable during the startup process:
- Use a network cable to connect the FRITZ!Repeater to a LAN port on the FRITZ!Box.
2 Loading the FRITZ!Repeater's factory settings
- Push and hold down the Connect button for about 15 seconds.
- The status LED now indicates by alternately flashing and lighting up that the factory settings are being loaded and that the FRITZ!Repeater is being restarted. This process may take several minutes.
- The status LED flashes continuously for at least 1 minute as soon as the factory settings have finished loading.
3 Adding a FRITZ!Repeater to the Mesh by button
- Briefly push the Connect button on the FRITZ!Repeater (for about 1 second) and release it again. When you release the button, the status LED starts to flash quickly.
- Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
FRITZ!Box model Connect button Connect LED FRITZ!Box 6690, 5690, 4060 Connect Connect FRITZ!Box 7690, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530 Connect / WPS Connect / WPS FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN - The process is complete as soon as the Mesh Master marks the FRITZ!Repeater with the Mesh symbol
in the Mesh Overview.
4 Connecting the FRITZ!Repeater with the existing Mesh Repeater
- Use a network cable to connect the FRITZ!Repeater to a LAN port on the existing Mesh Repeater.