Knowledge Base
AVM Content
Knowledge document #3466
FRITZ!Repeater 2400
This support document is available for the following products:
Status LED of the FRITZ!Repeater flashes or glows red
The FRITZ!Repeater's status LED continuously flashes red or remains red. The repeater does not transmit any more data, and the repeater's user interface can no longer be opened. The following error message may be displayed in the event log of the FRITZ!Box:
- "The Wi-Fi module was not initialized correctly. Please restart the FRITZ!Repeater! (#0102)"
Simply proceed as described below. After each measure, check whether the problem is solved.
1 Restarting the FRITZ!Repeater
- Unplug the repeater.
- Plug the repeater back in after 5 minutes.
2 Loading the FRITZ!Repeater's factory settings
- Push and hold down the Connect button for about 15 seconds.
- Now the factory settings are loaded and the FRITZ!Repeater restarts. This may take up to 2 minutes.
3 Running the recovery program
- Use the recovery program to reset the FRITZ!Repeater.
If the LED flashes quickly when the repeater restarts and then slowly flashes green after about a minute, you can reconfigure the FRITZ!Repeater in the FRITZ!Box home network or reconnect the FRITZ!Repeater with the router from another manufacturer.