To the knowledge base

Registering FRITZ!DECT 500 with the FRITZ!Smart Gateway

You can also register the LED light FRITZ!DECT 500 with the FRITZ!Smart Gateway to increase the number of smart home devices that can be used in your home network.

Requirements / Restrictions

  • The FRITZ!Smart Gateway is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.

1 Registering FRITZ!DECT 500

  1. Switch off the lamp that you want to screw FRITZ!DECT 500 into.
  2. Screw the FRITZ!DECT 500 into the E27 screw base of the lamp.
  3. Click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
  4. Click "Devices and Groups" in the "Smart Home" menu and then "Register Device".
  5. Click "Next".
  6. Within 2 minutes: Switch on the lamp with FRITZ!DECT 500. FRITZ!DECT 500 glows red and shows that it is ready to be registered with the FRITZ!Box.
  7. The LED light flashes green twice and then glows white as soon as it is successfully registered. Then the LED light is displayed in the FRITZ!Box user interface under "Devices and Groups" and can be configured there.