Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1664
FRITZ!DECT 302
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6690 Cable
- FRITZ!Box 6670 Cable
Setting up group switching for FRITZ!DECT radiator controls
You can combine several radiator controls, for example FRITZ!DECT 302, into a group and then easily control several radiators in the same room together.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Creating a group
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Devices and Groups" or "Groups and Templates" in the "Smart Home" menu.
- Click on the "Create Group" button.
- Enable the corresponding group of devices.
- Enter a name for the group and select the devices you want to switch together in the group.
- Click "Finished" or "Next" to save the settings. The group is then created.
2 Controlling a group with radiator controls
Radiator controls that you have grouped together can either be controlled automatically or manually:
Automatically controlling a group with a radiator control
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Devices and Groups" or "Groups and Templates" in the "Smart Home" menu.
- Click the (Edit) button for the group you want to set up automatic switching for.
- Set up the desired time and vacation switching.
- Under "Heating off" or "Heating ended", define when the radiator should not heat.
- Click "Apply" or "OK" to save the settings.
Manually controlling a group with a radiator control
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Operation" in the "Smart Home" menu.
- Click the plus or minus that corresponds to the group to change the temperature of the group.
Note:There are several ways to operate and control the radiator control group in the home network and from anywhere over the internet.
Temperature changes to an individual radiator control in the group are automatically transmitted to the entire group.