Recommend:
To the knowledge base
Knowledge document #3275
FRITZ!DECT 300
This support document is available for the following products:

Loading the factory settings of the FRITZ!DECT radiator control

Load the factory settings to delete all of the individual settings you have made for the FRITZ!DECT radiator control. This makes sense if you are going to use the FRITZ!DECT radiator control at a different location or are planning to pass it on to another user, for example.

You can use the Menu button to load the factory settings of the FRITZ!DECT radiator control.

1 Deregistering the FRITZ!DECT radiator control

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Devices and Groups" or "Device Management" in the "Smart Home" menu.
  3. Delete the device you want to load the factory settings for. Do this by clicking the "delete device" button and then (delete) or (delete) for the respective device.

2 Restart FRITZ!Box

Some of the radiator control's settings may remain in the FRITZ!Box after it has been deregistered. Therefore, restart the FRITZ!Box to delete all of the settings:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

3 Loading the factory settings

  1. Push the "Menu" button on the radiator control.
  2. Select the menu item "RES" and push "OK".
  3. Wait until "OK" flashes in the display and press the "OK" button.