Knowledge Base
AVM Content
To the knowledge base
Knowledge document #3728
FRITZ!DECT 210
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6690 Cable
- FRITZ!Box 6670 Cable
- FRITZ!Box 6660 Cable
Registering a FRITZ!DECT smart plug with the FRITZ!Smart Gateway
You can also register your FRITZ!DECT smart plugs with the FRITZ!Smart Gateway to increase the number of smart home devices that can be used in your home network.
Requirements / Restrictions
- The FRITZ!Smart Gateway is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.
1 Registering a FRITZ!DECT smart plug
- Plug the FRITZ!DECT smart plug into an outlet near the FRITZ!Smart Gateway.
- Click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
- Click "Devices and Groups" in the "Smart Home" menu.
- Click the "Register Device" button and then "Next".
- Within 2 minutes: Push the DECT button on the FRITZ!DECT smart plug. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT smart plug is in registration mode as long as the LED flashes quickly.
- As soon as the FRITZ!DECT smart plug is successfully registered, it is displayed in the FRITZ!Box user interface under "Devices and Groups" and can be configured there.