Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1231
FRITZ!DECT 210
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
Using a FRITZ!DECT smart plug
The smart plug, for example FRITZ!DECT 200, is integrated into your home network via an encrypted DECT connection.
You can either use the user interface or a button on the FRITZ!Box or the FRITZ!Smart Gateway to register the smart plug.
Requirements / Restrictions
- A FRITZ!Box with a DECT base station with FRITZ!OS 6 or later must be used. FRITZ!Box 7412 and FRITZ!Box 7312 do not support FRITZ!DECT smart plugs.
- To use FRITZ!Smart Gateway, FRITZ!OS 7.50 or later must be installed on the FRITZ!Box.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Registering a FRITZ!DECT smart plug via the user interface
- Plug the FRITZ!DECT smart plug into a wall outlet near the FRITZ!Box.
- If you want to register the FRITZ!DECT smart plug with your FRITZ!Box, click "Smart Home" in the FRITZ!Box user interface.
- If you want to register the FRITZ!DECT smart plug with your FRITZ!Smart Gateway, click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
- Click "Devices and Groups" or "Device Management" in the "Smart Home" menu.
- Click the button "Register Device" or "Register a FRITZ! Smart Home Device" and select the desired option.
- Within 2 minutes: Push the DECT button on the FRITZ!DECT smart plug. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT smart plug is in registration mode as long as the LED flashes quickly.
- The DECT LED on the FRITZ!DECT smart plug remains lit as soon as the DECT connection has been established.
2 Registering a FRITZ!DECT smart plug by button
- Plug the FRITZ!DECT smart plug into a wall outlet near the FRITZ!Box or the FRITZ!Smart Gateway.
- Push the DECT button on the FRITZ!DECT smart plug. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT smart plug is in registration mode as long as the LED flashes quickly.
- Within 2 minutes: Push the Connect button on the FRITZ!Box or on the FRITZ!Smart Gateway and hold the button down for about 1 second until the Connect LED starts to flash. If your FRITZ!Box does not have a Connect button, push the DECT button on the FRITZ!Box. Hold down the button for at least 6 seconds until the DECT or Info LED on the FRITZ!Box starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes.
- The DECT LED on the FRITZ!DECT smart plug remains lit as soon as the DECT connection has been established.
Now you can plug the FRITZ!DECT smart plug in wherever you want and configure the desired automatic switching settings, for example a schedule, in the "Smart Home" area of the FRITZ!Box user interface.