Recommend:

Knowledge Base

AVM Content

Knowledge document #3728

FRITZ!DECT 200

This support document is available for the following products:

Registering a FRITZ!DECT smart plug with the FRITZ!Smart Gateway

You can also register your FRITZ!DECT smart plugs with the FRITZ!Smart Gateway to increase the number of smart home devices that can be used in your home network.

Requirements / Restrictions

The FRITZ!Smart Gateway is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.

1 Registering a FRITZ!DECT smart plug

Plug the FRITZ!DECT smart plug into an outlet near the FRITZ!Smart Gateway.
Click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
Click "Devices and Groups" in the "Smart Home" menu.
Click the "Register Device" button and then "Next".
Within 2 minutes: Push the DECT button on the FRITZ!DECT smart plug. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT smart plug is in registration mode as long as the LED flashes quickly.
As soon as the FRITZ!DECT smart plug is successfully registered, it is displayed in the FRITZ!Box user interface under "Devices and Groups" and can be configured there.