Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Using an internet radio receiver in the FRITZ! home network
If your internet radio (for example a wireless radio, stereo system) is equipped with a network port or Wi-Fi, you can easily connect it to the FRITZ!Box home network. The internet radio can then access the internet and, depending on the model, play music from streaming services, the FRITZ!Box media server, or other media servers in the home network.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Configuring the FRITZ!Box
In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Network" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- Click "Additional Settings" in the section "WAN setting" or "LAN Settings" to display all of the settings.
- Click the "IPv4 Settings" button.
- Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.
Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.
- Click "Apply" to save the settings.
2 Configuring internet radio
Make sure that the internet radio obtains its IP settings from the FRITZ!Box:
- Configure the internet radio to automatically obtain IP settings via DHCP (this is the default setting for most internet radios). Refer to the manufacturer for information on how to set it up, for example consult the manual.
3 Connecting an internet radio to the home network
- Use either Wi-Fi or a network cable to connect the internet radio to the home network.
Now the internet radio is connected to the internet through the FRITZ!Box and can play music from the FRITZ!Box media server and other media servers in the home network (for example Kodi, Plex).
Note:Refer to the manufacturer for further information on how to set up the internet radio.