Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Cannot access the FRITZ!Box with MyFRITZ!Net
The FRITZ!Box user interface cannot be opened with MyFRITZ!Net:
- After logging into myfritz.net, you are not automatically redirected to the MyFRITZ! home page of the FRITZ!Box.
- After selecting a FRITZ!Box in the device overview on myfritz.net, the FRITZ!Box user interface is not displayed.
- You cannot call up the FRITZ!Box with its unique MyFRITZ! address (for example https://pi80ewgfi72d2os42.myfritz.net).
One of the following error messages is displayed by your web browser:
- "The page cannot be displayed"
- "This webpage is not available"
- "Error: Network Timeout"
- "Site cannot be reached"
- "Session Timeout"
- "Data Transfer Interrupted"
- "The server [...]myfritz.net took too long to respond"
- "404 not found"
- "requested resource was not found"
Simply proceed as described below. After each measure, check whether the problem is solved.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 FRITZ!Box is not accessible on the internet
The FRITZ!Box can only be accessed if the FRITZ!Box has an IPv6 or IPv4 address that is accessible on the internet and the device that is accessing it can reach this IP address.
Access via IPv4
For IPv4 internet access, the FRITZ!Box must obtain a public IPv4 address from the internet service provider. Access over IPv4 is not possible if the FRITZ!Box obtains a private IPv4 address.
You can find out whether the FRITZ!Box has a public or private IPv4 address using the guide Identifying the address range of the IPv4 address for the internet connection.
Access via IPv6
For IPv6 internet access, both the FRITZ!Box and the device that is to access the FRITZ!Box must be connected to the internet over IPv6. If only the FRITZ!Box obtains an IPv6 address but the other device is not connected to the internet via IPv6, IPv6 internet access is not possible.
You can call up the menu "Internet > Online Monitor" in the FRITZ!Box user interface to determine whether the FRITZ!Box is connected to the internet via IPv6.
You can test whether the device that is to access the FRITZ!Box is connected to the internet over IPv6 by calling up www.test-ipv6.com or www.ipv6-test.com on the device.
2 Enabling internet access to the FRITZ!Box via HTTPS
- Click "Internet" in the FRITZ!Box user interface.
- Click "MyFRITZ! Account" in the "Internet" menu.
- Enable the option "Internet access to the FRITZ!Box via HTTPS enabled".
- Click "Apply" to save the settings.
3 Creating users for internet access
Set up at least one user who is allowed to access the FRITZ!Box from the internet:
- Click "System" in the FRITZ!Box user interface.
- Click "FRITZ!Box Users" in the "System" menu.
- Click the (Edit) button for the user who should be allowed to access the FRITZ!Box from the internet or set up a new user for internet access:
- Click the "Add User" button.
- Enter a name for the user.
- Enter a new password for the user that differs from the password for your MyFRITZ! account.
- Enable the option "Access from the internet allowed".
- Click "Apply" to save the settings.
4 Maintaining a permanent internet connection
- Click "Internet" in the FRITZ!Box user interface.
- Click "Account Information" in the "Internet" menu.
- Click "Change connection settings".
- Enable the option "Maintain permanently (recommended for flat rates)". If the option is not shown, the FRITZ!Box is already permanently connected to the internet.
- Click "Apply" to save the settings.