Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6840 LTE
Configuring a firewall for FRITZ!VPN
The FRITZ!VPN software allows you to establish a secure VPN (Virtual Private Network) connection over the internet to your FRITZ!Box and access all of the devices and services in the home network of your FRITZ!Box.
If the computer with FRITZ!VPN is protected by a firewall on the computer or an upstream router, you may have to open ports and enable IP protocols in the firewall that are required by FRITZ!VPN before you can establish a VPN connection:
1 Configuring the firewall
By default, the settings required for FRITZ!VPN are enabled in all FRITZ!Boxes and do not have to be configured manually. Make sure that any additional firewalls on the computer or an upstream router are also set up for FRITZ!VPN:
- Configure the firewall to allow incoming and outgoing connections for the following ports and IP protocols:
- UDP port 53 (DNS)
- UDP port 500 (ISAKMP)
- UDP port 4500 (NAT traversal)
- ESP ("Encapsulated Security Payload", IP protocol number 50)
Note:The option for enabling the ESP protocol is often also called "IPsec Passthrough". You can find information on how to configure it in the manual, or consult the manufacturer of the firewall or router directly.