Knowledge Base
AVM Content
To the knowledge base
Knowledge document #3751
FRITZ!Box 7520
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
FRITZ!Smart Gateway is not marked with Mesh symbol
Although the FRITZ!Smart Gateway is connected to the FRITZ!Box and displayed in the Mesh Overview, the Mesh symbol is missing.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Installing the latest FRITZ!OS for the FRITZ!Smart Gateway
- Click "System" in the user interface of the FRITZ!Smart Gateway.
- Click "Update" in the "System" menu.
- Click on the "FRITZ!OS Version" tab.
- Click the "Find New FRITZ!OS" button.
- Click the "Start Update" button.
2 Unlocking the Mesh Master's buttons
You can only add devices to the Mesh by pushing a button. Therefore, unlock the buttons in the Mesh Master:
- Click "System" in the FRITZ!Box user interface.
- Click "Buttons and LEDs" in the "System" menu.
- Click on the "Keylock" tab.
- Disable the "Buttons locked" checkbox.
- Click "Apply" to save the settings.
3 Directly connecting FRITZ!Smart Gateway with the Mesh Master
The following step is only necessary if the FRITZ!Smart Gateway is connected to the Mesh Master via a device from another manufacturer (for example a switch, powerline device):
- Connect the FRITZ!Smart Gateway directly to a LAN port on the Mesh Master. Do not use the WAN port. Not every FRITZ!Box model has a WAN port.
4 Adding a FRITZ!Smart Gateway to the Mesh by button
You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the FRITZ!Smart Gateway first. We recommend the following order:
- Briefly push the Connect button on the FRITZ!Smart Gateway (for about 1 second) and release it again. When you release the button, the status LED starts to flash quickly.
- Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
FRITZ!Box model Connect button Connect LED FRITZ!Box 6690, 5690, 4060 Connect Connect FRITZ!Box 7690, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530, 4050 Connect / WPS Connect / WPS FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT FRITZ!Box 6490 WLAN WPS WLAN / DECT FRITZ!Box 7490 WLAN WPS WLAN / Info FRITZ!Box 7583 WPS WLAN / Info - The process is complete as soon as the Mesh Master marks the FRITZ!Smart Gateway with the Mesh symbol in the Mesh Overview.