Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1405
FRITZ!Box 7390
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
Saving and resetting consumption data of the FRITZ!DECT smart plug
You can completely delete the consumption data recorded by your smart plug, for example FRITZ!DECT 200. This way, the consumption data from an old device does not falsify the data of any new devices you connect. If you want, you can save the old device's data as a CSV file first.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Smart Home" in the "Home Network" menu.
- If available, select "All Smart Home devices" from the drop-down list "viewing".
- Click the button (Edit) for the respective device.
- Click on the "Energy Display" tab and then the "Total Consumption (kWh)" tab. If the tab is not displayed, enable the Advanced View first.
- If you want to save the consumption data, click the "Save" button and save the consumption data as a CSV file on the computer.
- If you want to reset the consumption data, click the "Reset" button in the section "Resetting consumption data".