Recommend:
To the knowledge base
Knowledge document #1405

Saving and resetting consumption data of the FRITZ!DECT smart plug

You can completely delete the consumption data recorded by your smart plug, for example FRITZ!DECT 200. This way, the consumption data from an old device does not falsify the data of any new devices you connect. If you want, you can save the old device's data as a CSV file first.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Smart Home" in the "Home Network" menu.
  3. If available, select "All Smart Home devices" from the drop-down list "viewing".
  4. Click the button (Edit) for the respective device.
  5. Click on the "Energy Display" tab and then the "Total Consumption (kWh)" tab. If the tab is not displayed, enable the Advanced View first.
  6. If you want to save the consumption data, click the "Save" button and save the consumption data as a CSV file on the computer.
  7. If you want to reset the consumption data, click the "Reset" button in the section "Resetting consumption data".
Language selection