Recommend:
To the knowledge base
Knowledge document #9
FRITZ!Box 7360
This support document is available for the following products:

Cannot make outgoing calls from a landline

A telephone connected to the FRITZ!Box doesn't work? ✔ This simple guide shows you how to set up your FRITZ!Box to make calls over a landline.

You cannot use a telephone registered with the FRITZ!Box to make calls from a landline.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Enabling the landline settings

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Enable the option "Landline enabled".
  5. Click "Apply" to save the settings.

2 Entering your location information

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Select your country from the drop-down list under "Location Information". If your country is not listed, select "Other country".
  5. For the "Country code", enter the leading zeros in the first field and the country code in the second field (for example, enter "00" and "49" for Germany, see fig.).
  6. For the "Area code", enter the leading zero in the first field and the area code in the second field (for example enter "0" and "30" for Berlin, see fig.).

    Fig.: Entering the country code and area code (e.g. for Germany and Berlin)

  7. Click "Apply" to save the settings and on the FRITZ!Box, confirm that the procedure may be executed, if you are asked to do so.

3 Deleting call blocks

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Call Handling" in the "Telephony" menu.
  3. Delete call blocks for outgoing calls to individual numbers or ranges of numbers that you want to call.

4 Checking the cabling

Errors in the cabling often go unnoticed. Therefore, make sure that the FRITZ!Box is correctly connected to your line:

  1. Check the cabling to your landline.

5 Setting your analog telephone to tone dialing

  1. Set your device to "tone dialing" (DTMF) and not "pulse dialing". Pulse dialing is no longer state of the art and can lead to dialing problems on a telephone system. We therefore cannot guarantee the flawless operation of connected devices on the FRITZ!Box with pulse dialing. If tone dialing is selected, you hear a tone when you press a number key; with pulse dialing, you hear clicking sounds. Refer to the manufacturer of the device for information on how to set it up, for example consult the manual.

6 Configuring the FRITZ!Box

Reconfiguring your telephone

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Delete the telephone that you cannot make calls with. To do so, click the corresponding (Delete) button.
  4. Use the wizard to reconfigure the telephone: To do so, click the "Configure New Device" button and follow the instructions.

Deleting dialing rules

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Call Handling" in the "Telephony" menu.
  3. Click on the "Dialing Rules" tab.
  4. Delete any dialing rules for numbers or number ranges you want to use your landline to call. In the factory settings, two dialing rules are configured for emergency numbers. You can edit these rules, but you cannot delete or block them.
  5. If a "Global Provider Prefix" ("Global Carrier Prefix") was entered on the "Provider Prefixes" ("Carrier Prefixes") tab, delete it and click "Apply".
  6. Do not configure any new dialing rules until you are able to make calls from the landline. If the error occurs again, the dialing rule is not suitable.

7 Checking the landline

  1. Disconnect the FRITZ!Box from the landline.
  2. Connect a telephone to the same line.
  3. If the telephone also does not work when connected to the line, contact your telephony provider and have your line checked.

    ATTENTION!You may be charged for checking. Ask your telephony provider about charges in advance!

Language selection