Recommend:
To the knowledge base
Knowledge document #3388

Unable to access the internet over a VPN connection

Although the VPN connection to the FRITZ!Box was successfully established, you cannot access the internet over the connection. While the VPN connection is active, the device either cannot access the internet or still sends all web requests directly to the internet and not over the VPN connection to the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem is solved.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Restarting the FRITZ!Box

You may be temporarily unable to correctly establish the VPN connection due to an error in the FRITZ!Box or its internet connection. Therefore, restart the FRITZ!Box so that it reinitializes the firewall and re-establishes the internet connection:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

2 Configuring parental controls to allow internet access

If you connected two networks via VPN (LAN-LAN linkup), the device's internet access may not be blocked by the FRITZ!Box parental controls of one of the FRITZ!Boxes involved. Therefore, make sure that the device has unrestricted internet access:

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Filter" in the "Internet" menu.
  3. Click on the "Parental Controls" tab.
  4. Check whether the device that is to access the internet via the VPN connection is displayed in the list of home network devices.
  5. If the device is displayed, select the access profile "Unrestricted" for the device or configure the access profile used by the device so that the device can access the internet.
    • If the device is not displayed, the devices uses the "standard" access profile. In this case, configure the "standard" access profile so that the device can access the internet.
  6. Click "Apply" to save the settings.

3 Deleting a VPN connection and reconfiguring it

If you use the FRITZ!VPN software to establish the VPN connection, the option "Send all data over the VPN tunnel" must be enabled when configuring the VPN connection so that all web requests are forwarded via the remote FRITZ!Box whenever a VPN connection is active. Therefore, reconfigure the VPN connection and make sure to enable this option:

  1. Delete the VPN connection in the Configure FRITZ!Box VPN Connection software.
  2. Delete the VPN connection in the FRITZ!VPN software and in the FRITZ!Box.
  3. Reconfigure the VPN connection between FRITZ!VPN and the FRITZ!Box.
Language selection