Recommend:
To the knowledge base
Knowledge document #3435

Using a smart home device from another manufacturer

In your FRITZ! home network, you can use smart home devices from other manufacturers that use the standard DECT ULE/HAN FUN or Zigbee for the radio connection, for example LED lights, motion detectors, door/window contacts, smart switches, smart plugs, roller shutter motors. The connection standard used by the respective smart home device is given in the manufacturer's product documentation.

DECT ULE/HAN FUN is a standard for connecting smart home devices that is used by many manufacturers.

Using smart home devices with FRITZ!Smart Gateway

Zigbee is also a common standard and is used by Philips Hue lamps and smart home lamps from IKEA, for example. You can register Zigbee devices directly with your FRITZ!Box or a FRITZ!Smart Gateway.

You can find a list of compatible and successfully tested Zigbee devices that can be used on our website at en.avm.de/service/zigbee.

 

Requirements / Restrictions

  • If you want to use a smart home device from another manufacturer that uses the standard DECT ULE/HAN FUN, neither DECT repeaters nor a FRITZ!Box 7390, 7270 or 7240 configured as a DECT repeater may be registered with the FRITZ!Box (under "Telephony > DECT > Monitor").

1 Registering a smart home device

Installation code and MAC address

The specific procedure for registering smart home devices depends on the manufacturer. Some smart home devices are registered by entering the serial number of the device, for example Philips Hue LED lights. Other smart home devices require the entry of a specific installation code and the MAC address, for example smart home devices from Bosch. You can find the serial number, installation code, and MAC address in the manual or on the device itself. The MAC address is sometimes also called the "EUI64" or "EUI-64" (64-bit Extended Unique Identifier).

  1. If you want to register the smart home device with your FRITZ!Box, click "Smart Home" in the FRITZ!Box user interface.
  2. If want to register the smart home device with the FRITZ!Smart Gateway, click "Smart Home" in the user interface of the FRITZ!Smart Gateway.
  3. Click "Devices and Groups" in the "Smart Home" menu.
  4. Click the "Register Device" button and follow the wizard's instructions.
  5. As soon as the smart home device is successfully registered, it is displayed in the FRITZ!Box user interface under "Devices and Groups" and can be configured there.

The smart home device is now set up and you can switch and control it in the home network and from anywhere over the internet.

Language selection