Recommend:
To the knowledge base
Knowledge document #1189
FRITZ!Box 6670 Cable
This support document is available for the following products:

Opening the FRITZ!Powerline user interface

You can configure all of the functions and view detailed information about the product, your access, and connections in the user interface of your FRITZ!Powerline device.

The user interface can always be reached, even without internet access. Whether you open the user interface with the corresponding address or Mesh Overview depends on whether the FRITZ!Powerline device is set to factory settings or is already integrated into the FRITZ! home network.

1 Opening the user interface when set to factory settings

For manual configuration, you can directly connect a wireless device with the FRITZ!Powerline device, or use a network cable to connect a device to the LAN port of the FRITZ!Powerline device and then use the address of the FRITZ!Powerline device to open the user interface:

  1. Either enter http://fritz.powerline or http://192.168.178.2 in the address bar of your web browser.

    Important:If you enter the address without the "http://", the web browser may start a web search instead of opening the user interface.

2 Opening the user interface from the Mesh Overview of the FRITZ!Box

After setting up the FRITZ!Powerline device in the FRITZ!Mesh you can easily open the user interface of your FRITZ!Powerline device with a mouse click in the Mesh Overview, just like with all other FRITZ! products, for example FRITZ!Repeater or FRITZ!Smart Gateway:

  1. Enter fritz.box in the address bar of your web browser.
  2. Click "Mesh" in the "Home Network" menu.
  3. Click the device name of the FRITZ!Powerline device.
Mesh overview in the FRITZ!Box user interface
Language selection