Recommend:
To the knowledge base
Knowledge document #1218
FRITZ!Box 6660 Cable
This support document is available for the following products:

Registering FRITZ!DECT Repeater with the FRITZ!Box

You can increase the DECT range of your FRITZ!Box (base station) with up to six FRITZ!DECT Repeaters and then even make calls with your cordless telephones from your garden or on different floors of your house. You must push a button to register it.

If you leave the coverage area of one device while making a call, the telephone will automatically connect to the other device without interrupting the call.

Requirements / Restrictions

  • A maximum of six FRITZ!DECT Repeaters can be registered with the FRITZ!Box. DECT repeaters from other manufacturers and FRITZ!DECT Repeaters cannot be registered in parallel.
  • All repeaters must be registered with the base station (star topology). It is not possible to register a repeater with another repeater (cascading).
  • The "DECT Eco" function can no longer be used.

1 Establishing a DECT connection

  1. Plug the FRITZ!DECT Repeater into a power outlet near the FRITZ!Box.
  2. Push the DECT button on the repeater. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The repeater is in registration mode as long as the LED flashes quickly.
  3. Within 2 minutes: Push the Connect button on the FRITZ!Box. Hold down the button for about 1 second until the Connect LED starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes. Other LEDs may also flash.
  4. The DECT LED on the repeater remains lit as soon as the DECT connection has been established.

2 Finding the ideal location for the FRITZ!DECT Repeater

  1. Select a location for the FRITZ!DECT Repeater where a telephone that is registered directly with the FRITZ!Box still has perfect reception. The DECT LED on the repeater must remain lit. If the LED flashes, the repeater is not connected to the FRITZ!Box. In addition, at the location you select for the repeater, voice transmission with every telephone must be absolutely interference-free in both directions when the repeater is switched off. Otherwise, the location is not a suitable place to position the repeater.

Now the FRITZ!DECT Repeater extends the DECT radio network of the base station. Register new telephones with the base station. You cannot register telephones with the repeater.

Note:FRITZ!Fons now display a small red 1 over the signal strength bars when they are logged onto the base station and a 2 when they are logged onto the repeater. If you are using several repeaters, the numbers 2 to 7 are used.



Help topics:

Language selection