Recommend:
To the knowledge base
Knowledge document #3514

Setting up an analog door intercom system in the FRITZ!Box

You can set up an analog door intercom system in the FRITZ!Box and then talk with visitors and open the door when you are away from home if you route the door call to an external telephone number, for example. If the door intercom system has a camera, you can have the image from the door intercom system displayed on a FRITZ!Fon or FRITZ!App Fon.

Requirements / Restrictions

  • The door intercom system must have an a/b interface that uses DTMF tone dialing. Other 2-wire or 4-wire solutions are not supported.
  • Only functions that the door intercom system provides according to the 1TR110 standard can be used with it. Any proprietary functions (functions not defined in this standard) it offers cannot be used.
  • The camera for the door intercom system saves images in JPG/JPEG, PNG or GIF file format. Other file formats, for example MJPG/MJPEG, are not supported.
  • The camera makes the images available via HTTPS, HTTP, or FTP.
  • To show the images, a FRITZ!Fon with color display (FRITZ!Fon MT-F, C4, or newer) must be used.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting the door intercom system

  1. Connect the door intercom system to an analog extension on the FRITZ!Box (for example "FON 1").

2 Setting up a door intercom system

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. If the analog extension (for example "FON 1") that you connected the door intercom system to is already listed, click the (Delete) button for the device.
  4. Click the "Configure New Device" button.
  5. Enable the option "Door intercom system" and click "Next".
  6. Enable the option "Door intercom system with a/b interface" and click "Next".
  7. When a bell button is pressed, the door intercom system calls the destination telephone number. In the field "Telephone Number of the Doorbell", enter the number assigned to the individual doorbells in the door intercom system. To open additional fields, click "Add Doorbell".

    Important:You may not use any internal telephone numbers of telephony devices connected to the FRITZ!Box for the bell buttons.

  8. From the drop-down list "Route Doorbells to", select the telephones or telephone number the doorbell should be routed to:

    Important:You can either select one or several internal numbers, or you can select an external telephone number. You cannot combine internal and external numbers.

    • If you want a specific telephone to ring, select the respective telephone.
    • If you want all of the connected telephones (broadcast call) to ring, select "All telephones".
    • If you want an external telephone number (for example another telephone line, mobile telephone) to ring, select "Telephone number" and enter the destination telephone number.
    • If you want several telephones connected to the FRITZ!Box (call group) to ring:
      1. Select the option "Call group".
      2. Select up to four telephones to be included in the call group.
      3. Click "OK".
  9. Click "Next" and then "Apply" to save the settings.

3 Configuring the door intercom system

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the door intercom system.
  4. From the drop-down list "Outgoing calls via", select the outgoing call number that should be used if you want to route the doorbell to a mobile telephone or an external line.
  5. If you want to use the "Open" function key on a FRITZ!Fon or with FRITZ!App Fon, enter the character sequence for the door opener.
  6. If the door intercom system is equipped with a camera or you use an IP camera in your home network, enter the complete web address with the image files in the "Live image" field. This URL must end with the file format of the image (for example image.jpg). The image is then displayed on the FRITZ!Fon and in FRITZ!App Fon when there is a call from the door intercom system. If you set up the "Calls" push service for the door intercom system, the FRITZ!Box sends you a push service mail including a camera image, either for all calls or only for the missed calls.
  7. Click "Apply" to save the settings.

4 Entering tone intervals in the door intercom system

The following step is only necessary if you have to enter the interval for a ringing tone and busy signal in the door intercom system (standard according to 1TR110):

  1. Enter 1000 ms +- 100 ms tone, 4000 ms +- 400 ms pause (425 Hz +- 10%) for the ringing tone.
  2. Enter 480 ms +/- 48 ms tone, 480 ms +/- 48 ms pause (425 Hz +- 10%) for the busy signal.

5 Notes on the live image displayed by FRITZ!Fon

The FRITZ!Fon only rings three times if you set up the live image function so that video transmission is not disturbed. If you want it to ring longer, add another telephone without live image to the call group. This telephone will continue to signal the call from the door intercom system.

Use the "OK" key to switch between Standard View and zoom, and use the navigation keys to change the area of the image displayed in the zoomed-in view. The selected area is then used for the next call.

6 Setting up a door intercom system on the Mesh Repeater as well

If you set up an additional FRITZ!Box as a Mesh Repeater, you can forward the doorbell of the door intercom system to the Mesh Repeater. In addition, you can also see the live image and use the door opener on a FRITZ!Fon that is registered to the Mesh Repeater. In our guide Setting up a door intercom system on a Mesh Repeater you will find instructions on configuring it.



Related topics:

Language selection