Knowledge Base
AVM Content
To the knowledge base
Knowledge document #1231
FRITZ!Box 6590 Cable
This support document is available for the following products:
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 7360
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
Registering a FRITZ!DECT smart plug with the FRITZ!Box
The smart plug, for example FRITZ!DECT 200, is integrated into your home network via an encrypted DECT connection. You can either use the registration button on the FRITZ!Box or a wizard in the user interface for the registration procedure.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Registering FRITZ!DECT with the wizard
- Plug the FRITZ!DECT into a power outlet near the FRITZ!Box.
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Devices and Groups" in the "Smart Home" menu.
- Click the "Register Device" button.
- Within 2 minutes: Push the DECT button on FRITZ!DECT. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT is in registration mode as long as the LED flashes quickly.
2 Registering FRITZ!DECT by button
- Plug the FRITZ!DECT into a power outlet near the FRITZ!Box.
- Push the DECT button on the FRITZ!DECT. Hold down the button for at least 6 seconds until the DECT LED starts to flash quickly. The FRITZ!DECT is in registration mode as long as the LED flashes quickly.
- Within 2 minutes: Push the DECT button on the FRITZ!Box. Hold down the button for at least 6 seconds until the DECT or Info LED on the FRITZ!Box starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes.
The DECT LED on the FRITZ!DECT remains lit as soon as the DECT connection has been established. Then you can plug the FRITZ!DECT in wherever you want; you can configure and operate it in the "Smart Home" area of the FRITZ!Box user interface.