Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7682
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7581
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 6890 LTE
- FRITZ!Box 6850 5G
- FRITZ!Box 6850 LTE
- FRITZ!Box 6690 Cable
- FRITZ!Box 6670 Cable
- FRITZ!Box 6660 Cable
Creating a scene for smart home devices
You can combine multiple actions and settings of your smart home devices that you saved as templates into one scene. Different device types like FRITZ!DECT radiator controls and smart plugs/LED lights can also be switched together in a scene. You can use preconfigured scenes or create individual scenarios to control your smart home devices easily and conveniently.
Note:This guide is valid for FRITZ!OS 7.50 or later. If you are using an older FRITZ!OS version, the configuration may differ or functions may not be available. You can find the FRITZ!OS version on the "Overview" page of the FRITZ!Box user interface.
1 Creating a template
First create the templates with the desired settings for your smart home devices that you want to combine in the scene:
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Automation" in the "Smart Home" menu.
- Click "Create Scene or Template".
- Click "Template" and then "Next".
- Select the group of devices that you want to switch or select "Use convenience features". As a convenience feature you can switch the Wi-Fi guest access or start a telephone call, for example.
Note:Only devices of the same kind, i.e. smart plug/LED light or radiator control, can be switched together in a template.
If a device is already assigned to a group, you cannot assign just the device to a template; you must assign the entire group to a template. - Select the desired settings or configure the desired switching.
- Enter a name for the template and then save the template.
2 Creating a custom scene
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Automation" in the "Smart Home" menu.
- Click "Create Scene or Template".
- Enable "Predefined or custom scene" and click "Next".
- Enable "Own Scene" and click "Next".
- Enter a name for the scene and click "Next".
- Select the templates you want to combine in the scene and click "Finished". Now the scene is created.
3 Adjusting a predefined scene
There are two preset scenes, "Coming Home" and "Leaving Home" from automatically generated templates that you can use directly. These preset scenes switch all of the LED lights and smart plugs registered with the FRITZ!Box, Wi-Fi and the Wi-Fi guest network, and the FRITZ!Box answering machine on or off, and set the radiator controls to the comfort or cool-down temperature.
If you would like to adjust a predefined scene, proceed as follows:
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Automation" in the "Smart Home" menu.
- Click (edit) next to the "Leaving the House" or "Coming Home" scene.
- Enable all of the actions to be included in the scene. Disable the actions which should not be included in the scene.
- Click "Apply" to save the settings.
4 Applying a scene
- Click "Smart Home" in the FRITZ!Box user interface.
- Click "Operation" in the "Smart Home" menu.
- Click "Applying" for the desired scene.
Note:You can also enable the scenario with a FRITZ!DECT smart switch or a FRITZ!Fon (menu "Home Network > Smart Home"), or use FRITZ!App Smart Home to enable it in the home network or over the internet.
Routines can be used to automatically switch scenes.