Knowledge Base
AVM Content
- FRITZ!Box 7690
- FRITZ!Box 7590 AX
- FRITZ!Box 7590
- FRITZ!Box 7583 VDSL
- FRITZ!Box 7583
- FRITZ!Box 7582
- FRITZ!Box 7581
- FRITZ!Box 7560
- FRITZ!Box 7530 AX
- FRITZ!Box 7530
- FRITZ!Box 7520
- FRITZ!Box 7510
- FRITZ!Box 7490
- FRITZ!Box 7430
- FRITZ!Box 7390
- FRITZ!Box 6890 LTE
Integrated fax transmission fails occasionally or always fails
Although you configured the the integrated fax function according to our guide, fax transmission fails occasionally or always fails. You either cannot send faxes at all, or only part of the faxes is sent. When a fax you are sending is aborted, one of the following error messages may be displayed, or one of the following error messages may be displayed in the event log of the FRITZ!Box:
- "Transmission failed [0x3301]."
- "Transmission failed [3495]."
- "Transmission failed (0x3490)."
- "An error occurred while sending a fax. Fax transmission was unsuccessful or incomplete."
- "An error occurred. Error description: Fax transmission failed. Please enter your data again. If the error occurs again, please consult AVM Support."
- "Not Acceptable Here (488)"
- "Unsupported Media Type (415)"
- "Not Acceptable Here (606)"
Simply proceed as described below. After each measure, check whether the problem is solved.
1 Entering your location information
- Click "Telephony" in the FRITZ!Box user interface.
- Click "Telephone Numbers" in the "Telephony" menu.
- Click on the "Line Settings" tab. If the tab is not displayed, the correct location information is automatically entered by your provider.
- Select your country from the drop-down list under "Location Information".
- For the "Country code", enter the leading zeros in the first field and the country code in the second field (for example, enter "00" and "49" for Germany, see fig.).
- For the "Area code", enter the leading zero in the first field and the area code in the second field (for example "0" and "30" for Berlin, see fig.).
Fig.: Entering the country code and area code (e.g. for Germany and Berlin)
- Click "Apply" to save the settings.
2 Using a different web browser
The problem may be caused by the web browser (for example plug-ins may be interfering):
3 Testing different remote sites
- Test fax transmission to or from different fax machines on different telephone lines.
- If fax transmission only fails with a particular remote site, the fax machine at the remote site is either not ready to receive faxes or incorrectly configured.
4 Checking the event log of the FRITZ!Box
- Click "System" in the FRITZ!Box user interface.
- Click "Event Log" in the "System" menu.
- Select "Telephony" from the drop-down list.
- Check whether one of the following error messages is displayed for the fax that failed. If so, note the information that correspond to the message.
- If the message "Unsupported Media Type (415) is displayed, your provider does not support the requested codec or does not allow you to send faxes.
- If the message "Not Acceptable Here (488 or 606)" is displayed, your provider does not support the T.38 standard. Without T.38, reliable fax transmission over the internet is not possible.
Note:In this case, you can either use a telephone number from a provider that supports T.38 or disable T.38 again for fax reception. T.38 may not be necessary for fax transmission.
- If the message "Not Acceptable Here (488 or 606)" is displayed, your provider does not support the T.38 standard. Without T.38, reliable fax transmission over the internet is not possible.
5 Checking the protocol for fax transmission
- Click "Telephony" in the FRITZ!Box user interface.
- Click "Telephone Numbers" in the "Telephony" menu.
- Click on the "Voice Transmission" tab.
- Look for the aborted faxes under "Details on Completed Calls" and check whether "T.38" is displayed in the "Coding" column for these faxes:
- If "T.38" is displayed, T.38 was used for the fax transmission.
- If "T.38" is not displayed, T.38 was not used. Without T.38, reliable fax transmission over the internet is not possible.
Note:If your internet telephony provider does not support T.38, for the fax you can use an internet number of an internet telephony provider that supports T.38.
- If "T.38" is not displayed, T.38 was not used. Without T.38, reliable fax transmission over the internet is not possible.