Recommend:
To the knowledge base
Knowledge document #1438

Using an Xbox in the FRITZ!Box home network

You can easily connect your Xbox to the FRITZ!Box home network using a network cable or Wi-Fi, regardless of whether it is an Xbox Series X, Xbox Series S, Xbox One or Xbox 360. The Xbox can then access the internet and connect to online games or be used for chats with Skype.

The configuration instructions in this guide apply to the Xbox Series X with operating system version 10.0.19041.5481. The options and paths may be different with other versions. Refer to Microsoft for further information on how to set up the Xbox, for example see the Xbox support.

1 Enabling the FRITZ!Box's DHCP server

In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. Click "Additional Settings" in the section "LAN Settings" to display all of the settings.
  5. Click the "IPv4 Settings" button.
  6. Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.

    Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.

  7. Click "Apply" to save the settings.

2 Connecting the Xbox to the FRITZ!Box

Either use Wi-Fi or a network cable to connect the Xbox to the home network of the FRITZ!Box.

Connecting the Xbox using a network cable

  1. Use a network cable to connect the Xbox to the home network of the FRITZ!Box.

Connecting the Xbox via Wi-Fi

  1. Push the menu button on the Xbox controller.
  2. Navigate to your avatar in the Xbox menu and then click "Settings".
  3. Select "Network Settings" in the "General" menu.
  4. Select "Set up wireless network".
  5. Select the name of the FRITZ!Box's Wi-Fi network (SSID).
  6. Enter the FRITZ!Box's network key and confirm the entry.

    Note:If you do not know the wireless settings of the FRITZ!Box, you can determine them as described in our guide Setting up a Wi-Fi connection to the FRITZ!Box.

3 Configuring the FRITZ!Box for online games

By default, the FRITZ!Box's firewall protects all of the devices in the home network from incoming connections and unwanted data from the internet. However, this can cause problems with some online games (for example FIFA) because they must be accessible to other players from the internet.

If the Xbox displays the NAT type "Open" in the "Network settings", the FRITZ!Box and Xbox are already correctly configured.

If the Xbox displays the NAT type "Strict" or "Moderate", some of the services or data required by the Xbox are being blocked, which is usually because port sharing was not configured. In this case, adjust the FRITZ!Box settings:

Important:To be fully accessible from the internet, the FRITZ!Box requires a public IPv4 address.

Setting up automatic port sharing

Set up the FRITZ!Box for automatic port sharing so that the Xbox itself can open all of the ports it requires in the FRITZ!Box:

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" in the "Home Network" menu.
  3. Click on the "Network Connections" tab.
  4. Click the (Edit) button next to the device you want to configure.
  5. Enable the option "Permit independent port sharing for this device" in the "Permit Access" section.
  6. Click "Apply" to save the settings.

Disabling the Teredo filter in the FRITZ!Box

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Filter" in the "Internet" menu.
  3. Click on the "Lists" tab.
  4. Click "Global Filter Settings" to display all of the settings.
  5. Disable the option "Teredo filter enabled".
  6. Click "Apply" to save the settings.

Setting up static port sharing

If you still cannot connect to online games or the connection drops, configure the required port sharing settings manually:

  1. Configure static port sharing in the FRITZ!Box for the ports and IP protocols used by Xbox Live (source: Xbox Support):
    • TCP ports: 53, 80, 3074
    • UDP ports: 53, 88, 500, 3074, 3544, 4500
  2. If the online game uses other ports in addition to the ones required for Xbox Live, configure port sharings for those ports in the FRITZ!Box. For example, FIFA 21, the football simulation game, requires the following additional port sharings (source: EA help):
    • TCP port: 1863
    • UDP port: 1863

    Note:With just a few clicks in the internet you can find lists of ports used by other games such as Battlefield, Call of Duty, Starcraft & Co., for example at www.portforward.com.

Now the FRITZ!Box is fully configured for incoming and outgoing internet connections. If you still experience problems when playing individual online games or the Xbox still displays "moderate" as the NAT type, the FRITZ!Box may not have obtained a public IPv4 address from your internet service provider.



Help topics:

Related topics:

Language selection