Recommend:
To the knowledge base

Parties cannot hear each other

When conducting calls, one of the following issues either occasionally occurs or always occurs. It either occurs right at the beginning of the conversation or sometime during the conversation, for example after five minutes:

  • You do not hear the other party.
  • The other party does not hear you.
  • The parties cannot hear each other.

This may give the impression that the telephone connection has been terminated. However, the connection is still active. You can see that it is because the telephony LED on the FRITZ!Box remains lit. The LED does not switch off until you end the call by hanging up.

1 Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

2 Configuring security software

The following steps are only necessary if the problem occurs when using FRITZ!App Fon:

  1. Briefly disable the security software on your telephone, for example web protection from Symantec - Norton mobile Security.
  2. Check whether you can now make calls with FRITZ!App Fon without any problems.
  3. If you can make calls now, then the security software was interfering with the voice connection. Re-enable the software and configure it so that it allows voice connections. Refer to the manufacturer for information on how to set it up, for example consult the manual.

3 Activating the microphone

The following steps are only necessary if the problem occurs with FRITZ!App Fon on an iOS device:

  1. Open the iOS settings.
  2. Tap "Privacy" and then "Microphone".
  3. Activate the microphone for FRITZ!App Fon.

4 Disabling expanded security functions and re-registering the telephone

The following steps are only necessary if the problem occurs with a cordless telephone from a different manufacturer:

Disabling expanded security functions

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "DECT" in the "Telephony" menu.
  3. Disable the expanded security functions in the section "Security".
  4. Click "Apply" to save the settings.

Re-registering the telephone

5 Disabling support for CAT-iq 2.0 and re-registering the telephone

Disabling support for CAT-iq 2.0

The following steps are only necessary if the problem occurs with a cordless telephone from a different manufacturer:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "DECT" in the "Telephony" menu.
  3. Disable the option "Support for CAT-iq 2.0-compatible devices enabled" in the section "Troubleshooting".
  4. Click "Apply" to save the settings.

Re-registering the telephone

6 Contacting your cable provider

We are not aware of any additional measures to correct the error; therefore, the FRITZ!Box cannot solve this problem.

  1. Contact your cable provider.