Recommend:
To the knowledge base
Knowledge document #3578

Setting up FRITZ!Box for use with a Fonira line

The FRITZ!Box is optimally prepared for use with Fonira. Simply connect the FRITZ!Box to the internet connection, select Fonira as the internet service provider in the FRITZ!Box, and configure telephony.

The complete FRITZ!Box range of functions for internet, telephony, and multimedia is then available to all of the devices in your home network without restriction.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting the FRITZ!Box

  1. Insert the DSL cable into the "DSL" socket on the FRITZ!Box and into the left socket of your telephone jack marked with a triangle (see fig.).
    Using a DSL cable to connect FRITZ!Box with a DSL line

2 Setting the country of use

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password given on the type label of the FRITZ!Box and click "Log In".
  3. Click "System" and then "Region and Language".
  4. Click on the "Regional Options" tab.
  5. Select "Austria" from the drop-down list.

    Important:When the regional options are changed, the telephone settings (for example telephony devices, call diversion settings, dialing rules) are reset and must be reconfigured.

  6. Click "Apply" to save the settings.

3 Configuring the internet connection in the FRITZ!Box

  1. Click "Wizards" in the FRITZ!Box user interface.
  2. If the wizard for internet access does not start automatically, click "Wizards" and then "Configure the Internet Connection".
    Calling up the FRITZ!Box wizard
  3. Enable the option "Use DSL/WAN for internet connection" and click "Next".
  4. Select "Fonira" from the drop-down list and enable the correct connection type.
  5. Click "Next" and follow the wizard's instructions.
  6. Now the FRITZ!Box checks whether the internet connection can be established. Configuration is complete as soon as the message "The internet connection check was successful" is displayed.

    Important:If the internet connection check fails, your internet access may not have been activated yet. In this case, contact Fonira.

4 Setting up telephony in the FRITZ!Box

Having your login information ready

  1. Have the login information for telephony that you received from Fonira ready.

    Note:Fonira sent you the login information via email after you concluded the contract with them. If you did not receive your login information, contact Fonira.

Configuring telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the "New Telephone Number" button.
  4. Select "fonira IP-Festnetz" from the drop-down list.
  5. Enter your telephone number including the area code (for example 011234567) by "Telephone Number".
  6. For the "Password", enter the password you received from Fonira.
  7. Enter your area code by "Area code" (for example 01).
  8. Click "Next" and follow the wizard's instructions.

Assigning telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the respective telephony device.

    Important:If the telephony device was not configured yet, click the "Configure New Device" button and follow the wizard's instructions.

  4. From the drop-down list "Outgoing Calls", select the number to be used by the telephony device for making outgoing calls. If you do not select a telephone number, the number entered under "Telephone Numbers > Line Settings" is used for making calls.
  5. Select the telephone numbers to which the telephony device should react when you receive calls. You can select up to ten numbers (including the number for outgoing calls).
  6. Click "Apply" to save the settings.



Help topics:

Language selection