Recommend:
To the knowledge base
Knowledge document #3354

Setting up the FRITZ!Box as a Mesh Repeater

You want to use a FRITZ!Box as a repeater via LAN or Wi-Fi? ✓ Here's how to set up your FRITZ!Box as a Mesh Repeater.

You can set up your FRITZ!Box for use as a Mesh Repeater and use a network cable to integrate it into the Mesh of your FRITZ!Box with internet access (Mesh Master) to increase the range of your home network easily and efficiently.

As a Mesh Repeater, the FRITZ!Box automatically adopts all of the necessary settings from the Mesh Master (for example Wi-Fi access information, guest access, schedule) and creates an additional Wi-Fi network that enables your devices to connect to the home network. In addition, the telephone numbers entered in the Mesh Master can be activated for the Mesh Repeater and used by telephone devices configured in it.

As soon as the Mesh Repeater is integrated into the Mesh, it is marked with the Mesh symbol in the user interface of the Mesh Master:

Mesh Overview of the Mesh Master with FRITZ!Box as a Mesh Repeater

Requirements / Restrictions

  • This FRITZ!Box does not support operation as a Mesh Repeater via Wi-Fi. An overview of FRITZ!Box models that support this operating mode can be found in Which FRITZ! products support Mesh?

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the Mesh Repeater's factory settings

To perform the following steps, the FRITZ!Box that you want to configure as the Mesh Repeater must be set to factory settings:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Factory Settings" tab.
  4. Click the "Load Factory Settings" button.
  5. During this process, all of the LEDs flash once. The WLAN LED remains lit as soon as the factory settings have finished loading.

2 Connecting the Mesh Repeater to the Mesh Master via LAN

  1. Use a network cable to connect a LAN port the FRITZ!Box that you want to configure as a Mesh Repeater to a LAN port on the Mesh Master.

3 Adding the Mesh Repeater to the Mesh by button

You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the Mesh Repeater first. We recommend the following order:

  1. Push and hold down the Connect button on the Mesh Repeater (see table) until the Connect LED flashes. Other LEDs may also flash.
  2. Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConnect LED
    FRITZ!Box 6690, 5690, 4060 Connect Connect
    FRITZ!Box 7690, 7682, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530, 4050 Connect / WPS Connect / WPS
    FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT
    FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  3. The process is complete as soon as the Mesh Master marks the Mesh Repeater with the Mesh symbol in the Mesh Overview.

4 Setting up telephony in the Mesh

You can always set up IP telephones as telephone devices in the Mesh Master, even if the telephones are connected to the Mesh Repeater. If you also use different telephones connected to the Mesh Repeater:

  1. Set up telephony in the Mesh.



Help topics:

Related topics:

Language selection