Recommend:
To the knowledge base
Knowledge document #3503
FRITZ!Box 5490
This support document is available for the following products:

Connecting FRITZ!Powerline with a Mesh Repeater (cascading)

You can cascade several Mesh Repeaters in the Mesh. This type of cascading makes it possible for you to extend your home network in a specific direction beyond the Wi-Fi range of a Mesh Repeater.

This means that not only can you connect your FRITZ!Powerline adapter with the FRITZ!Box (Mesh Master), you can also connect it with an already existing Mesh Repeater. It does not matter whether the Mesh Repeater is another FRITZ!Powerline adapter, a FRITZ!Box, or a FRITZ!Repeater.

In this guide we show you how to connect your new FRITZ!Powerline adapter with an already existing Mesh Repeater.

Example of Wi-Fi cascading with FRITZ!Repeater and FRITZ!Powerline

Requirements / Restrictions

  • The existing Mesh Repeater is connected with the Mesh Master and is marked with the Mesh symbol in the Mesh Overview.
  • FRITZ!OS 7 or later is installed on the FRITZ!Powerline adapter.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Determining the ideal arrangement of the Mesh Repeaters

To ensure that the data is transported quickly to the Mesh Master without bottlenecks, arrange the Mesh Repeaters in descending order in the cascade according to their respective performance features. The most powerful Mesh Repeater is connected to the FRITZ!Box and the least powerful Mesh Repeater is used at the end of the cascade.

The most powerful repeaters are tri-band repeaters (for example FRITZ!Repeater 6000, FRITZ!Box 4060). Dual-band repeaters (for example FRITZ!Repeater 2400, FRITZ!Powerline 1260E) are almost as powerful, and the least powerful repeaters are single-band repeaters (for example FRITZ!Repeater 600, FRITZ!Powerline 1240E).

If the Mesh Repeater has a LAN port and your house is wired, we recommend using a network cable to establish the connection. Since connections via network cable, unlike Wi-Fi connections, are not subject to interference, data is always transported with the maximum data rate.

2 Loading the factory settings of the FRITZ!Powerline adapter

To perform the following steps, the new FRITZ!Powerline adapter must be set to factory settings:

  1. Plug the FRITZ!Powerline adapter into an outlet and wait until the Power LED or WLAN LED remains lit or the Connect LED starts flashing slowly.
  2. Push the corresponding button on the device:
    ModelButtonDuration
    FRITZ!Powerline 1260(E) / 1220 Connect 15 seconds
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security    		 15 seconds
    FRITZ!Powerline 1220E / 1000E Powerline · Security 10-15 seconds
    FRITZ!Powerline 546E / 540E WLAN · WPS und Powerline · Security 10 seconds
    FRITZ!Powerline 530E / 510E Security 12 seconds
    FRITZ!Powerline 520E / 500E Reset 2 seconds
  3. During this process, all of the LEDs flash once. The Power LED or WLAN LED remains lit or the Connect LED starts flashing slowly as soon as the factory settings have finished loading.

3 Connecting the FRITZ!Powerline adapter with the available Mesh Repeater

Connecting the FRITZ!Powerline adapter

  1. Use a network cable to connect the new FRITZ!Powerline adapter to a LAN port on the existing Mesh Repeater.

Setting up the FRITZ!Powerline adapter

  1. Click "Access to Home Network" in the user interface of FRITZ!Powerline.
  2. Click the "Change the Type of Connection" button in the "Access to Home Network" menu.
  3. Enable the option "Wireless bridge" and click "Next".
  4. In the table, use the MAC address to select the Wi-Fi network of the existing Mesh Repeater and click "Next".
  5. Enter the Wi-Fi access information of the Mesh Repeater and click "Next".
  6. Click "Finish" to save the settings.
  7. The WLAN LED on the new FRITZ!Powerline adapter remains lit as soon as setup is completed.
  8. Clear the LAN connection between the new FRITZ!Powerline adapter and the home network.

4 Adding the FRITZ!Powerline adapter to the Mesh

You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the Mesh Repeater first. We recommend the following order:

  1. Briefly push the Connect button (see table) on the FRITZ!Powerline adapter (for about 1 second) and release it again. When you release the button, all of the LEDs start to flash.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260(E) Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546E / 540E WLAN · WPS
  2. Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConnect LED
    FRITZ!Box 6690, 4060 Connect Connect
    FRITZ!Box 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6660, 5590, 5530 Connect / WPS Connect / WPS
    FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info
    FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT
    FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT
    FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN
  3. The process is complete as soon as the Mesh Master marks the FRITZ!Powerline adapter with the Mesh symbol in the Mesh Overview.

5 Finding the ideal location for the FRITZ!Powerline adapter

To extend the range as much as possible, the new FRITZ!Powerline adapter requires a fast and stable Wi-Fi connection to the existing Mesh Repeater:

  1. Position the FRITZ!Powerline adapter where the quality of the Mesh Repeater's Wi-Fi signal is good. You can find tips on positioning it in the guide Finding the ideal location for the Mesh Repeater.



Help topics:

Related topics:

Language selection