Recommend:
To the knowledge base

Registering FRITZ!Fon

You want to register a cordless telephone with the FRITZ!Box? ✔ Here we show you how to easily connect your DECT telephone.

Our FRITZ!Fon models are perfectly coordinated with the FRITZ!Box. Simply use the wizard in the FRITZ!Box user interface or your telephone's menu to register them. You can register a FRITZ!Fon with up to four base stations. To switch the active base station, select "Menu > Settings > Registration > Select Base". Of course you can also use the menu to register FRITZ!Fon with a base station from another manufacturer.

Requirements / Restrictions

  • The base station must support the DECT-GAP profile. 

    Note:DECT-GAP is a common standard for cordless telephones supported by all FRITZ!Box models with integrated DECT base stations.

1 Using the FRITZ!Box wizard to register a telephone

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the "Configure New Device" button.
  4. Enable the option "Telephone (with or without answering machine)" and click "Next".
  5. Enable the option "Cordless (DECT) telephone" and click "Next".
  6. Start the registration procedure on the telephone, then click "Connect" and follow the instructions.
  7. If you are asked for the PIN, enter the FRITZ!Box's four-digit PIN on the telephone and confirm it with "OK".

    Note:You only have to enter the PIN if you changed the preconfigured PIN "0000" in the FRITZ!Box user interface in the menu "Telephony > DECT > Base Station". When using the wizard to register telephones, you do not have to push any buttons on the FRITZ!Box.

2 Using the telephone's menu to register a telephone

Registering FRITZ!Fon with the FRITZ!Box

  1. Switch the telephone on and press the right select key "Register". If "Register" is not displayed above the right select key:
    1. Press the "Menu" key.
    2. Select the menu item "Settings" and press "OK".
    3. "Registration" > "Register" > "OK"
  2. Wait until the message "Press and hold DECT button on base station!" appears.
  3. Within 2 minutes: Push the registration button on the FRITZ!Box. Which button you must push depends on the FRITZ!Box model:

    Note:With FRITZ!Box models that have both DECT and Connect buttons, you can use either button.

    • If your model has a Connect button, push the Connect button on the FRITZ!Box. Hold down the button for about 1 second until the Connect LED starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes. Other LEDs may also flash.
    • If your model has a DECT button, push the DECT button on the FRITZ!Box. Hold down the button for at least 6 seconds until the DECT or Info LED on the FRITZ!Box starts to flash. The FRITZ!Box is in registration mode as long as the LED flashes.
  4. If you are asked for the PIN, enter the FRITZ!Box's four-digit PIN on the telephone and confirm it with "OK".

    Note:You only have to enter the PIN if you changed the preconfigured PIN "0000" in the FRITZ!Box user interface in the menu "[Telephony >] DECT > Base Station".

Registering FRITZ!Fon with a base station from another manufacturer

  1. Switch the telephone on and press the right select key "Register". If "Register" is not displayed above the right select key:
    1. Press the "Menu" key.
    2. Select the menu item "Settings" and press "OK".
    3. "Registration" > "Register" > "OK"
  2. Wait until the message "Press and hold DECT button on base station!" appears. When it does, push the registration button on your base station.
  3. Enter the PIN of the base station and confirm it with "OK".